39.6 cm / 15.
Table of Contents 1. 2. 3. 4. 5. 6. 7. 8. About these Instructions.............................................................................. 5 1.1. Warning symbols and key words used in these instructions................... 5 1.2. Proper Use.................................................................................................................. 6 1.3. Declaration of Conformity.................................................................................... 6 Safety Instructions........
9. 10. 11. 12. 13. 14. 15. 16. 17. 18. The Hard Drive............................................................................................ 33 9.1. Important Directories...........................................................................................34 The Optical Drive........................................................................................ 35 10.1. Inserting a Disc.......................................................................................................
19. 20. 21. 22. 18.3. Do You Need More Help?....................................................................................61 18.4. Driver Support........................................................................................................61 18.5. Transport...................................................................................................................62 18.6. Maintenance......................................................................................................
Personal Information Please append the following to your proof of ownership: Serial number ................................................ Date of purchase ................................................ Place of purchase ................................................ You will find the serial number on the underside of the Notebook. Where applicable, also copy the number on your warranty documents.
1. About these Instructions Before using the device for the first time, please read these operating instructions carefully, paying special attention to the safety notices. This device should only be used as designated and as described in these instructions. Please keep these instructions in a safe place for future reference. Always include these instructions if passing the device on. 1.1.
• `` Bullet point/information on operating steps and results Tasks to be performed 1.2. Proper Use This device is designed for the use, management and editing of electronic documents and multimedia content, as well as for digital communication. The device is intended for private use only and not for industrial/commercial use.
2. Safety Instructions 2.1. Dangers for children and people with reduced ability to operate electronics • This device is not intended for use by people (including children) with reduced physical, sensory or mental abilities or for those without experience and/or knowledge, unless they are supervised by a person responsible for their safety or they have been instructed in its use. • Children should be supervised to ensure that they do not play with the device.
• The Notebook is not intended for use by companies in the heavy industry sector. • To avoid damage from lightning strikes, do not operate the Notebook during thunderstorms. • Do not place any objects on top of the Notebook and do not exert pressure on the display. Otherwise, there is a risk that the display may break. • If the screen breaks, there is a danger of injury. If this happens, pick up the shattered pieces wearing protective gloves and send them to your service centre for professional disposal.
2.3. Never Carry Out Repairs Yourself WARNING! Never try to open or repair the device yourself. There is a risk of electric shock. • If there is a fault, contact the Medion Service Center or other suitable specialist workshop. 2.4. Data Backup CAUTION! Back up your data on external storage media before each update. We do not accept any liability for claims for compensation arising from loss of data or any consequential loss or damage. 2.5.
2.6. Environmental Requirements • The Notebook is most reliably operated at an ambient temperature between 5° C (+41° F) and 30° C (+86° F) and at a relative humidity between 20% and 80% (without condensation). • When powered off, the Notebook can be stored at temperatures between 0° C and 60° C (+32° F and 140° F). • During a thunderstorm, disconnect the mains plug and the antenna plug.
2.7. Ergonomics PLEASE NOTE! Avoid dazzle, reflections and strong bright-dark contrast in order to protect your eyes. The Notebook should never be placed next to a window because this is the brightest part of the room in daylight. This brightness can make it more difficult for the eyes to adjust to the darker display. The Notebook should always be positioned so that the direction of vision is parallel to the window front.
2.8. Connecting Follow the instructions below to connect your Notebook correctly and safely: 2.8.1. Power Supply DANGER! Do not open the housing of the mains adapter. There is a risk of electric shock when the housing is open. It does not contain any parts requiring maintenance. The socket outlet must be close to the Notebook and easily accessible. • To disconnect the power supply from your Notebook (via the mains adaptor), pull the mains plug from the power outlet.
• Maintain a distance of at least one metre from sources of high-frequency and magnetic interference (TV sets, loudspeakers, mobile phones, DECT telephones, etc.) in order to avoid malfunctions and data loss. • Please note that only shielded cables that are shorter than 3 metres may be connected to the external interfaces of this Notebook. Please only use double-shielded cables for printer cable connections. • Do not exchange the supplied cable for another one.
2.11. Battery CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer‘s instructions. Never attempt to disassemble or reassemble. Do not heat up above 60°C (140°F). Do not dispose of in fire or directly short circuit.
4. Views 4.1.
4.2. Left Side 8 7 9 10 11 12 13 (illustration similar) 7) 8) 9) 10) 11) 12) 13) Power Socket LAN Port (RJ-45) HDMI Connector USB 3.0 Port USB 3.0 Port Mini Display Port Audio Out /Headset connection 4.3. Right Side 14 15 16 17 18 19 (illustration similar) 14) 15) 16) 17) 18) 19) Multimedia Card Reader USB 2.
5. First Use To operate your Notebook safety and ensure a long service life, you should read the “Operational safety” chapter at the beginning of this manual. All operating software is already fully preinstalled on the Notebook so there is no need for you to install any more drivers and you can get started right away. `` Before starting, insert the battery by placing it into the compartment until it clicks into place. Be sure to fasten the battery compartment to prevent the battery falling out.
`` Switch the Notebook on by pressing the on/off switch (19). The Notebook will now start and run through various steps. PLEASE NOTE! There should be no bootable disk (e.g. the recovery disc) in the optical drive as this will prevent the operating system from being loaded from the hard drive. The operating system will be loaded from the hard drive. The loading process takes a little longer during the initial setup. Once all the necessary data has been entered, the operating system will be set up.
6.2. Mains Power Your Notebook comes with a universal mains adapter for alternating current which automatically adapts to the available power source. The following values are supported: AC 100–240 V~/50–60 Hz. Observe the safety information concerning the power supply on pages 12 ff. The adapter is connected to an AC outlet via a mains cable. The mains adapter DC cable is connected to the left side of the Notebook (7). The adapter has an on/off switch (optional).
The Microsoft Store allows you to purchase new apps or update previously installed apps. If you log in on a local account, you can set up a Microsoft account later at any time. The following animated windows simply contain information about using the new Windows® 8 operating system. No entries of any kind may be made during the animation. The Windows® 8 interface appears after the login process.
6.3.2. Removing the Battery `` To remove the battery pack, slide the battery lock and to the ‘lock open’ position and remove the battery pack from the compartment. 2 1 CAUTION! Do not remove the battery while the Notebook is switched on or data may be lost. Take care when storing the battery and when using the Notebook that the contacts on the battery and the Notebook are not soiled or damaged. This could cause malfunctions. 6.3.3. Charging the Battery The battery is charged using the mains adapter.
6.3.5. Battery Performance The actual operating time varies depending on the configuration of the power-saving functions. You can configure these to suit your requirements in the Control Panel under System and Security, Power Options. Note: your Notebook consumes more power when running certain applications, e.g. when playing a DVD. 6.3.6. Checking the Battery Charge To check the current battery charge status, move the cursor over the power icon in the task bar.
6.5. ECO Function (optional) You will be able to save energy and extend the running time of your battery by deliberately activating functions. The ECO Function is switched on or off by means of the Fn + F2 key combination. 7. Display 7.1. Switching the Display Mode 7.1.1. Safety instructions during the switching process • Ensure that the cable does not become entangled when changing the display mode.
Opening and closing the display can be assigned different functions in the power options. `` Fold over the display with your thumb and index finger until you feel some resistance (at 300°). `` The keyboard on the notebook will be automatically deactivated when it is placed onto a stable surface. `` You can now use the touchscreen. A detailed description of the touch screen can be found on the following pages. Opening and closing the display can be assigned different functions in the power options. 7.3.
7.3.2.
Diagram Command Hold down `` Press an app tile and hold it down to move the app to a new location `` Press the top edge of an open app and hold it down to close it and drag the app to the bottom edge of the screen Tap / double-tap `` Tap on the required app to open it `` Double-tap in desktop mode to open an application 7.4. Screen Resolution The integrated monitor can display up to 1366 x 768 pixels.
7.5. Appearance and Customisation This program gives you the option of customising your desktop. This includes the background image, the screensaver and other settings for your monitor and your graphics card. The program can be started as follows: • Right-click on the Windows desktop and left-click on Personalise. or • Via Settings, Personalisation, Display by double clicking with the left mouse button. `` Move the mouse pointer into the top right or bottom corner of the display and click Settings.
7.6. Connecting an External Monitor The Notebook has a Mini Display Port (12) as well as an HDMI port (9) for an external monitor. `` Shut down your Notebook correctly. `` Plug the external monitor’s signal cable into the Mini Display Port socket on the Notebook (12). Alternatively, you can use the digital HDMI connection (High Definition Multimedia Interface) (9) to transmit picture and sound signals. `` Connect the external monitor to the mains and switch it on. `` Now switch your Notebook on.
7.6.1. Duplicate This mode duplicates the Notebook display on the external monitor. PLEASE NOTE! In this mode the same screen resolution must be configured for both devices. 7.6.2. Extend In this mode, a blank desktop is displayed on the second (external) monitor. Windows on the first screen can be moved onto the second screen and vice versa. The screen resolution and colour quality can be configured individually for each of the display devices under Settings, Personalisation, Display. 7.6.3.
8.1.1. Notebook-Specific Keyboard Shortcuts Description Fn + F1 Fn + F2 Fn + F4 Fn + F5 Fn + F6 Fn + F7 Fn + F8 Fn + F9 Fn + F10 Fn + F11 Fn + Num Lk Fn + Scr Lk 30 of 71 Sleep To configure these keys to suit your requirements, please go to Power Options. ECO function (optional) Enables or disables the ECO function. Mute Switches the sound on or off. Quieter Decreases the playback volume. Louder Increases the playback volume. Darker Reduces the brightness of the display.
8.2. The Touchpad In normal mode, the cursor follows the direction specified by moving your fingers in the corresponding direction on the touchpad. ATTENTION! Do not use pens or other objects as this can damage your touchpad. The left and right mouse buttons are found in the lower section of the touchpad and can be used in the same way as those on a conventional mouse. You can also perform a click or a double-click on the touchpad directly by tapping the touchpad surface once or twice briefly.
8.2.1. Two-Finger Touchpad Operation Your touchpad supports two-finger operation which enables certain commands to be executed in some applications.
9. The Hard Drive The hard drive is your main memory medium and combines high storage capacity with rapid data access. You Notebook is supplied with an OEM version** of the Microsoft Windows®8 operating system which supports all of the Notebook’s performance features. We have configured your Notebook’s hard drive so that you will be able to work with it optimally without having to install any additional drivers yourself.
9.1. Important Directories We have listed the most important directories below and described their contents. CAUTION! Do not delete or modify these directories or their content otherwise data may be lost or system functionality may be impaired. C:\ The C: drive root directory contains important files required for Windows® 8 startup. On delivery these files are hidden for security reasons.
10. The Optical Drive 10.1. Inserting a Disc Unlike optical drives on a desktop PC, the Notebook uses a mount to hold the disc. When inserting the disc ensure that it is pressed into the mount correctly and that it clicks into position there. PLEASE NOTE! Do not stick protective film or other adhesive labels to the disc. To prevent damage to your drive, do not use any deformed or damaged discs. CAUTION! Do not use scratched, broken, dirty or poor quality discs.
CAUTION! Do not try to remove the disc from the drive while the Notebook is accessing the optical drive. 10.1.1. Emergency Release of a Blocked Disc In the event of the drawer no longer opening automatically, it can be opened manually providing your device has an emergency eject hole. `` Exit Windows® 8 and switch off the Notebook. `` Insert a long pointed object (e.g. straightened paperclip) into the emergency release until you feel some resistance. `` A slight push now opens the drawer.
10.4. Issues Relevant to the Burner This section only concerns devices supplied with a CD-RW, a combination CD/DVD read drive or a DVD-RW drive. First some information about blank discs 10.4.1. Blank CDs and DVDs Normal CDs are pressed by a glass master and then sealed. With blank discs, digital information is burned onto them using the drive’s laser. They are therefore more sensitive then conventional discs.
10.5. Installing battery / additional hard drive (optional) You have the option of exchanging the optical drive for an additional hard drive or a battery. PLEASE NOTE! The additional hard drives/batteries are not included in the delivery. 10.5.1. Safety instructions • • • • Switch off your notebook before exchanging the optical drive. Do not operate or transport your notebook without an optical drive or a second hard drive/battery installed.
11. The Sound System 11.1. External Audio Connections Your Notebook has an integrated stereo speaker so you can always reproduce sound without additional devices. Using the external connections provides you with an ideal opportunity to connect your Notebook to external devices. The Fn + F5 and Fn + F6 keyboard shortcut enables you to adjust the volume. WARNING! Excessive volume when using headphones or earphones can damage your hearing. Before pressing play, set the volume to the lowest setting.
12. Network Operation 12.1. What is a Network? We talk about a network when multiple computers are directly connected to one another. This allows users to transfer information and data with one another and to share their resources (printers and drives). Here are a few concrete examples: • In an office, messages are exchanged by e-mail and appointments are managed centrally. • Users share one printer on the network and back up their data to a central computer (server).
12.2.1. Requirements A so-called WLAN access point may be used as a remote station. A WLAN access point is a radio transmitting device that communicates with your Notebook and controls access to the connected network. WLAN access points are frequently found in large offices, airports, train stations, universities or Internet cafés. They provide access to particular services and networks or to the Internet. Access permissions are generally necessary and often result in usage charges.
CAUTION! Do not operate the Bluetooth function in locations (e.g.: hospitals, aeroplanes, etc.) where there is sensitive equipment. Do not switch the device unless you are sure it will cause no interference. 12.4. Flight Mode In flight mode, all wireless connections (e.g. WLAN, Bluetooth) are disabled. Flight mode is disabled by default to ensure that all wireless connections are available. `` Move the mouse pointer into the top right or bottom corner of the display and click Settings.
13. The multi-Card Reader Memory cards are media that are used, e.g. in the field of digital photography, and are gradually replacing the diskette. The shape and capacity of a memory card can vary depending on the manufacturer. Your Notebook supports the following formats: • MMC (MultiMediaCard) • SD (Secure Digital), SDHC, SDXC When inserting the memory cards, ensure that the contacts are pointing in the right direction, as specified in the list below.
15. The Universal Serial Bus Port The universal serial bus (USB 1.1 and USB 2.0) is a standard for connecting input devices, scanners and other peripherals. Up to 127 devices can be connected to the USB ports via a single cable. The USB 3.0 ports are fully backwards compatible with USB 2.0 and 1.1. Your Notebook has 2 USB 3.0 connection sockets (10/11) and 2 USB 2.0 connection sockets (15). PLEASE NOTE! Where possible, always connect your USB devices to the same port that they were originally installed on.
16.2. Software This section deals with the subject of software. We distinguish here between the operating system, the software (the applications), the Windows activation and the UEFI firmware configuration. PLEASE NOTE! The current Windows family currently includes Windows 8 and Windows 8.1. Windows 8.1 is the first update of the Windows 8 generation. 16.3.
16.5. Windows® 8 – What’s New 16.5.1. Microsoft Account A Microsoft account is an e-mail address and password for logging in to Windows® 8. You can use any e-mail address. We recommend using the address you use to communicate with friends and log into your favourite web sites, however. The Microsoft account also allows you to purchase or download apps from the Store and install them on up to five devices.
16.5.3. Jump Lists Jump lists offer a practical way of calling up recently opened files. To display the recently used files, simply right-click on the application icon in the taskbar. Thus if you right-click on the Word icon, the recently used Word documents are displayed. You can also easily place other files you wish to have easily to hand in the jump list so that they are always displayed. This allows you to access documents that you use frequently in just a few mouse clicks.
16.5.5. Improved Device Management Windows® 8 allows you to connect, manage and use all devices via the central “Devices” function. All devices are shown in a central location. With the new “Device Stage” technology, however, Windows® 8 goes one step further with device management. Device Stage helps you to use all compatible devices that are connected to the computer. Thanks to Device Stage you can now display the device status and perform frequently used commands within a single window.
16.6.1. Logging in to Windows To be able to work with Windows® 8, you must set up a Windows® 8 user account. `` Move the mouse pointer into the top right or bottom corner of the display, move the mouse down and click Settings. `` Next, select Change PC settings. `` Open the User category. `` Select Add a user, to set up additional user accounts. Windows® 8 allows you to log in using 3 different login procedures. Windows® 8 gives you the choice of standard login by password, a PIN or an image code.
16.7. Linking a User Account to a LiveID You can link your user account to a LiveID. This enables you to log in to any computer or mobile device connected to the Internet using your LiveID. `` Move the mouse pointer into the top right or bottom corner of the display, move the mouse down and click Settings. `` Next, select Change PC settings. `` Open the User category. `` Select Switch to a Microsoft account. `` Now enter your Windows Live ID e-mail address.
Information such as the following may be displayed here, for example: Windows® 8 App Windows® 8 apps are executable programs. The “Desktop” tile opens the traditional Windows display. The Internet Explorer tile launches Internet Explorer PLEASE NOTE! Apps are applications that are displayed on a desktop with a program thumbnail. The app thumbnails are bigger than the standard tiles. 16.9. Windows® 8 Desktop This image shows a symbolic representation of additional programs.
Information such as the following may be displayed here, for example: Classic desktop apps Desktop apps are applications that are displayed on a desktop with a program thumbnail. The app thumbnails are bigger than the standard tiles. The classic “Power Recover” desktop app launches the system recovery program. The classic “Microsoft Office” desktop app launches the Microsoft Office program. Windows® 8 apps from third-party suppliers are displayed as follows.
Linking apps to the Start screen `` Right-click on the Start screen. `` Click All Apps in the bottom right hand corner of the display. `` Right-click on the desired app to highlight it. `` Click Pin to Start in the bottom left-hand corner of the display. Linking apps to the taskbar `` Right-click on the Start screen. `` Click All Apps in the bottom right-hand corner of the display. `` Right-click on the desired app to highlight it. `` Click Pin to Taskbar in the bottom left-hand corner of the display.
Arranging apps `` Click and hold the left mouse button down on the desired app and drag it to the desired position. Selecting multiple apps `` Right-click the desired apps. 16.9.2. Using the Search Function Use the search function to find individual tasks, settings or apps quickly. `` Move the mouse pointer into the top right or bottom corner of the display and click Search. `` Enter the name of the app or file and select an entry from the results list on the left-hand side of the display.
General `` Configure the general settings for time zone, spell checking, language and memory here. `` Reinstall the operating system without losing personal user data or key basic settings. `` Restore your Notebook to its factory settings. `` Perform a reboot with a CD inserted. Data protection `` Configure the security settings for apps, accounts and Windows® 8 here. Devices `` Install additional external connected devices here, e.g. joystick or USB speaker.
16.11. Windows® 8 Power On/Off Functions The new Windows® 8 allows you to restart your Notebook, put it into sleep mode or shut it down. Changes can be made to the sleep settings at any time in the power options. In sleep mode the content of your Notebook’s RAM is preserved while practically all other components of your Notebook are disabled or their power consumption reduced to a minimum.
16.13. ResettingtheNotebooktoitsFactorySettings In the event of problems with the installation or other software problems which make it necessary to reinstall the software, Windows® 8 offers three options for reinstalling Windows® 8 on your Notebook. First ensure that you have backed up all important data and programs. 16.13.1. Running System Restore `` After restarting, press the F11 key or start up the Notebook with the F11 key held down to launch PowerRecover.
16.14. UEFI firmware configuration The UEFI firmware configuration (basic hardware configuration of your system) provides you with a number of options for the configuration and operation of your notebook. For example, you can modify the operating mode for interfaces, security features or power supply management. The Notebook has already been configured by the manufacturer to ensure optimum operation.
17. FAQ – Frequently Asked Questions Do I need to install the discs supplied? −− No All programs are preinstalled. The discs are provided as backup copies only. Where can I find the necessary drivers for my Notebook? −− The drivers can be found in the second hard drive partition in the Drivers and Tools folders. What is Windows® 8 activation? −− You will find a relevant section in these operating instructions containing detailed information on this topic.
18. Customer Service 18.1. What To Do In Case of Hardware Problems Malfunctions can sometimes have quite trivial causes, but they may also be the result of defective components. We have included a brief troubleshooting guide below which may help to solve any problems. If these tips don’t do the trick, then we’ll be more than pleased to help you out. Just give us a call! 18.2. Find The Cause Start by carefully checking all the cable connections.
18.2.1. Faults and Possible Causes The screen is black. `` The Notebook is in hibernation. Solution: Press the on/off switch. The Notebook turns itself off during operation. `` The battery may be flat. Plug the Notebook in using the mains adapter and charge the battery. The Notebook cannot be switched on. `` If you are running the Notebook on batteries, check that they have been inserted correctly and are fully charged. Wrong time and date displayed. `` Click the clock display in the taskbar.
18.5. Transport Please note the following information if you wish to transport the Notebook: • Switch the Notebook off. This ensures that the hard drive heads are automatically moved to a safe area to avoid damage. Remove any inserted DVDs/CDs. • After transporting the Notebook, wait until the appliance has reached room temperature before switching it on. Large changes in temperature or fluctuations in humidity can cause moisture build-up within the Notebook due to condensation.
18.6. Maintenance CAUTION! None of the parts inside the Notebook housing require cleaning or maintenance. You can increase the lifespan of your Notebook with the following measures: • Always unplug the device, disconnect all cables and remove the battery before cleaning. • Clean the Notebook with a damp, lint-free cloth. • Do not use solvents, corrosive or aerosol-based detergents to clean the device.
18.7. Care of the Display • • • • • Close the Notebook when you are not working with it. Avoid scratching the surface of the screen because it can be easily damaged. Make sure that no water droplets remain on the screen. Water can cause permanent discolouration. Clean the screen with a soft, lint-free cloth. Do not place the screen in strong sunlight or near ultraviolet light. The Notebook and its packaging can be recycled.
19.1. Notes for Service Technicians • Only service technicians may open up the Notebook housing or upgrade or modify your Notebook. • Use only original replacement parts. • Before opening the housing, disconnect all power and connecting cables and remove the battery. If the Notebook is not disconnected from the power supply before being opened, there is a risk that components could be damaged. • Internal components of the Notebook may be damaged by electrostatic discharge (ESD).
20. Recycling and Disposal Should you have any questions concerning the disposal please contact your dealer or customer service. Packaging Your device has been packaged to protect it against transportation damage. Packaging is raw material and can be re-used or added to the recycling system. Batteries Do not dispose of used or defective batteries in the household rubbish! They should be taken to a collection point for used batteries.
21. European EN 9241-307 Class II Standard For active matrix LCDs (TFT) with a resolution of 1366 x 768 pixels, each of which consist of three sub-pixels (red, green, blue), there are a total of approx. 3.1 million control transistors in use. Due to this very high number of transistors and the associated extremely complex manufacturing processes used, occasionally one or more pixels can fail or become incorrectly controlled.
Pixel defect types: • Type 1: permanently illuminated pixel (bright, white dot) even when not activated. A white pixel occurs due to the illumination of all three sub-pixels. • Type 2: non-illuminated pixel (dark, black dot) even when activated. • Type 3: abnormal or faulty red, green or blue sub-pixel (e.g.
21.1. FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
22. Index B Battery Mode................................................ 20 Charging the Battery............................. 21 Discharging the Battery....................... 21 Inserting the Battery............................. 20 Removing the Battery........................... 21 Battery Performance.................................. 22 Blank CDs and DVDs................................... 37 Bluetooth........................................................ 41 C Cabling....................................
R Recycling and Disposal............................. 66 Restarting....................................................... 56 S Saving Energy............................................... 56 Sleep................................................................ 56 Software Getting to know Windows® 8............. 45 Windows® 8 – What’s New................... 46 Windows activation............................... 45 Sound card..................................................... 38 T Taskbar....................
