System information

Installation
MD 81460 9
EN
Pay attention to the fact that they could be damaged when inserting the
laying of the cables.
• Operate the RESET button (26) with a ballpoint pen or another pointed ob
ject.
• Insert the component as described below.
The ISO adapter plug
Use the ISO adapter plug of your vehicle for the ISO socket block of the car radio,
to create a safe electrical connection.
Backup cable
Pay attention to the fact that the pink backup cable for the station memory is
lying at continuous plus.
Press the RESET button (26) after all the connections have been made.
Antenna relay cable
The blue cable is available for a relaycontrolled antenna. The relay extends the
antenna automatically when the radio is switched on. When it is switched off, the
antenna is retracted.
This relay cable can also be used to control an external amplifier. Please refer to
the amplifier's operating instructions for the correct connections.
Never connect the blue cable to the engine cable; this could damage the
radio!