Instruction manual

125 x 125 mm
14.10.2009 08:05
9
After Sales Su
pp
ort TEL: [phone]
WEB Support: www.medion.com.au
 Connect the charger cradle to a professionally installed AC
240 V ~ 50 Hz mains socket.
 To remove the power cord quickly and easily from the
mains in an emergency, the socket must be easily
accessible and close to the appliance.
 Do not kink or crush the power cord.
 Use only the charger supplied.
 Take measures to prevent moisture or liquid from
penetrating the camcorder or the charger cradle.
 Never touch the charger cradle with wet hands.
 Never use the camcorder if the power cord is defective.
 To avoid any danger, replace the charger cradle and its
power cord by a charger unit of the same type if either
component is damaged. In such a case, please contact our
service centre.
 In the event of a fault or malfunction, immediately switch
off the camcorder.
 Protect the camcorder and charger cradle from rain and
splash water.