User manual

IPCAM User Manual
Upgrade Device Firmware:Upgrade Device Firmware and device embeded web UI
sofeware in this page.
Restore Factory Settings: Restore factory settings of the device.
Reboot Device:Reboot the device.
Back: Back to Monitoring Mode.
2.5.1 Multi-Device Settings
z Add cameras in LAN
In the Multi-Device Settings page,you can see all devices searched in LAN.The 1st Device
is this device deault.You can add more cameras list in LAN for monitoring. This Web
software supports up to 9 IP Cameras online simultaneously.Click “
The 2ND Device”
and Double click the item in the “Device List in Lan”, Alias、Host and Http Port will fill in
automatically.Enter the correct username and password then click “add”.Add more
cameras in the same way.
Figure 2.10
z Add cameras in the Internet
Firstly,make sure the camera added can access in the Internet with the IP address or
DDNS domain.like this:http://202.96.133.134: 9008 or http://IPcamera.dyndns.org:9008
You can enter the Host: 202.96.133.134 port: 9008 or Host: IPcamera.dyndns.org
port: 9008.Enter the correct username and password then click “add”.Add more cameras
in the same way as shown in Figure 2.11.
- 13 -