User manual

IPCAM User Manual
4) Enter”UPnP Settings”page,the UPnP Status should be UPnP Succeed.If the status is
not Succeed,you may enter “Basic Network Settings” page to change Http Port (details:
2.5.2). Then click <SUBMIT> and reboot Device.
5) Re-login the Camera homepage to check and make sure the DDNS Status and UPnP
Status is Succeed.
6) You only need to enter the domain name(domain name+Port number
http://ipcam.kicks-ass.net:81/) in the IE address bar ,the browser will visit the IP Camera.
Wait for several minutes and the IP Camera will dial up to access the Internet
automatically, and the communication with the DDNS server is established successfully.
In the way, the user can access the IP Camera from a WAN by using the DDNS domain
name.
If the gateway settings and DDNS settings have been completed,ener the DDNS dynamic
domain name(for example,
http://ipcam.vicp.net/,do not add www.) in the address bar of
the IE to access the IP Camera.If multiple IP Cameras are connected to the same
router,enter DDNS dynamic domain + port number(for example,
http://ipcam.vicp.net:85/)
in the address bar of the IE to access different IP Cameras.
Figure 3.5
- 24 -