User manual

IPCAM User Manual
Figure 1.1
1 Sensitive Hole
2 Infrared LED
3 Network Indicator LED If there is network activity, the LED will blink.
4 LENS CMOS sensor.You can turn around the lens manually to adjust the focus
range.
5 Built-in Mic
Warning: Do not turn the Pan/Tilt by force for it may cause damage to internal
components of the Pan/Tilt !
1.3.2 Interface
IPCAM01 IPCAM02
Figure 1.2
LAN : RJ-45/10-100 Base T
DC5V : 5V/2A Power supply
I/O PINS: c Output(+5V) d Output eAlarm input fInput (GND) (you can see
2.5.5 For
more information)
RESET BUTTON: Press and hold down the RESET BUTTON for 5 seconds.Release the
power button and IP camera will be reset back to the factory default parameter.
1.4 PC System Requirements
System configuration requirements: ( Example for view four IP Camera )
CPU: 2.06GHZ or above Memory: 256M or above
Network Card: 10M or above Display Card: 64M or above memory
Recommendable Operating System: Windows2000 or Windows XP
- 3 -