Service manual

Outline of the M785
1-20 FIC M785 Service Manual
Summary screen: [Disable] / [Enabled] Display system configuration on boot
4I/O Device
Configuration
Submenu Peripheral Configuration
n Num-Lock on Boot – Allows you to set the power-on state for the <NumLock>
key. Set this to [LockOn] if you want to enable <NumLock> during power on.
n Embedded Share Memory – [8MB] [16MB] [32MB] [64MB] – Embedded
Share Memory AGP VGA Memory Size.
n EmbedDed Audio Device – [Enabled] or [Disabled] SiS Embeded Audio
( SiS 7018 AC97 Audio )
n Summary Screen – Select the display of configuration on Boot.
n I/O Device Configuration – Lets you configure input/output device such
as Serial Port, Parallel Port, and Floppy disk controller.
PhoenixBIOS Setup Utility
Advanced
I/O Device Configuration Item Specific Help
Config
ure serial port
A using options:
Serial port A: [Enabled]
Base I/O address [2F8] [Disabled]
Serial port B: [Enabled] No configuration
Parallel port: [Auto] [Enabled]
Mode: [Bi-directional] User configuration
Floppy disk controller: [Enabled]
[Auto]
BIOS or OS chooses
configuration
(OS Controlled)
Displayed when
Controlled by OS
F1 Help
h
Select Item -/+ Change Values F9 Setup Defaults
Esc Exit
‘’
Select Menu Enter Select 4Sub-Menu F10 Save and Exit
Figure 1-15 I/O Device Configuration Sub-Menu
Serial port A [Disabled] / [Enabled]
/ [Auto]
Configure serial port A using options:
Disabled - No configuration,
Enabled - User configuration,
Auto - BIOS or OS configuration.
(OS Controlled) – Displayed when
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com