Notes on these Operating Instructions The operating instructions and installation guidelines have been organized so that subjectrelated information can be easily found using the contents list. Note You will find comprehensive Operating Instructions for navigation on relevant CDs/DVDs and at the online help of the device. The section "Frequently Asked Questions" contains answers to questions that are frequently addressed to our customer service department.
Quality The components used have been selected to provide a product that has a high level of functionality and is user friendly, safe and reliable. A well-balanced hardware and software design allows us to offer you a technologically advanced navigation system, which is both practical and enjoyable to use. Service Our customer care is there to provide support and assistance whenever you have questions or are experiencing problems.
Contents Safety and Maintenance .................................................................................. 1 Safety Instructions ......................................................................................................... 1 Data Security ................................................................................................................. 1 Operating Environment ................................................................................................. 2 Repair ....
SuperPIN and UUID ..................................................................................................... 18 Making subsequent settings ........................................................................................ 19 Password Request ....................................................................................................... 20 Resetting the Navigation System ................................................................... 21 Reset .................................
Selecting an Alarm Signal ......................................................................................... 51 Setting the Volume .................................................................................................. 52 Snooze Function ...................................................................................................... 53 Ending the Alarm Clock Application ......................................................................... 53 Sudoku (optional) ................
Conditions of Warranty for the United Kingdom ........................................... 74 Index .............................................................................................................
Safety and Maintenance Safety Instructions Please read this section carefully and follow all the instructions provided. This will help ensure reliable operation and prolong the life of your appliance. Keep the packaging and the user instructions for future reference or enquiries at a later date. If you pass the article on to another person, you should pass on these instructions. Never allow children to play with electrical equipment unsupervised.
Operating Environment Failure to follow these instructions may lead to your appliance being damaged. In cases where products are damaged as a result of misuse or neglect the associated guarantee will be considered void. Keep your navigation System and all connected devices away from moisture and avoid exposure to dust, heat and direct sunlight, especially in the car. Make sure you prevent your appliance from getting wet, e.g. from rain and hail, at all times.
Electromagnetic Compatibility When connecting additional or other components the “Electromagnetic Compatibility Directive” (EMC) must be adhered to. Please note that only screened cable (maximum 10ft) should be used with this appliance. For optimal performance, maintain a distance of at least 10 ft. from sources of highfrequency and magnetic interference (televisions, loudspeaker systems, mobile telephones etc.).This will help to avoid malfunctions and loss of data.
Information about the Regulatory Compliance according to R&TTE Bluetooth (only for model E4445) The company declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Complete declarations of conformity are available under www.medion.com/conformity. Battery Operation Your appliance is powered by an integrated battery.
Care of the Display Avoid scratching the display surface as this may be easily damaged. We recommend using a display protection film (mylar) to prevent scratching of the screen. Please contact your nearest dealer for this accessory. The plastic on the display at delivery is purely for protection during transportation! Ensure that no traces of water remain on the screen. Water can cause irreversible discoloration. Use only a soft, lint-free cloth to clean the screen.
Transport When transporting the appliance please follow the instructions below: 6 After transporting the appliance wait until the unit has acclimatised and adjust to surrounding conditions (e.g. room temperature and humidity) prior to use. In the event of large fluctuations in temperature or humidity, condensation or moisture may form inside the appliance. This can cause an electrical short-circuit.
Supplied Items Please check the condition of items supplied and check for missing items using the list below. If you find your package to be incomplete, please forward to us all claims for missing items within 14 days from the date of purchase.
Views Front Components 8 Ref Component Description Microphone (only for models E4245 and E4445) Battery Charge Indicator The LED will flash orange during the charging process. It will shine constant green when the accumulator is fully charged. Bluetooth indicator This LED will blink at different speeds, according to the connection status, if Bluetooth has been activated (only for model E4445) Touch Screen Displays the output of your appliance.
Back Components GPS Antenna Ref Component Description Loudspeaker Plays back music, language statements and warnings. Top Components Ref Component Description On-/ Off button Turn the device on or off by pressing and holding the On/Off button. You will switch to the stand-by mode or reactivate the device by quickly pressing the button. Memory card insertion slot Accepts an optional memory card for removable storage.
Bottom Components Ref Component Description Mini-USBConnector Connection to external power supply as well as connection for connecting to a PC by means of the USB cable (for data matching) You also have the possibility to connect an external TMC receiver here (only for the model E4145) Left Side Ref Component Description Earphones Connects to a pair of stereo earphones Using this appliance at full volume for extended periods of time may cause damage to the hearing capacity of the list
Initial Set up The following is a step by step guide to assist in the initial Set-up of the navigation system. Start by removing the protective plastic from the display. I. Charging the Battery The battery of your navigation system can be charged in the following ways: Using the supplied car adapter or using a suitable USB cable.
II. Power Supply Car Adapter (similar picture) 1. Plug the jack () of the connection cable into the corresponding receptor at the bottom of your navigation system. 2. Insert the power adapter () into the cigar lighter socket ensuring, that it will not lose contact while driving. This could cause a malfunction. Alternative possibility of charging the battery The battery will charge as soon as you connect your navigation device to a switched-on PC or notebook by means of a USB cable.
III. Switching on the Device You will switch your navigation device on or off again completely by pressing the On/Off key for a long time (> 3 sec.). The navigation system will start the first setting up automatically. Select the language that you require first. The brand logo will appear and your device will display the entry screen after a few seconds.
Note You will not be able to select the Navigation menu or the settings if the navigation software does not find any map files in the device or on a memory device. Then the ‘Other applications’ menu will appear automatically. Note Brief pressure on the on/off button will be enough to switch the device on or off, provided that your navigation system is connected to an external source of electricity or is running in battery operation (standby mode).
General Operating Instructions Switching on/off the device Your device will be in its normal operating state after the initial set up. You can activate and deactivate your device with the On-/Off switch. 1. To start your navigation system press briefly the On-/Off switch . Note Your device is delivered in a status in which it will not switch off independently. You can adjust the period of operation to suit your needs using the Settings button on the main screen of your device.
This display will also appear after the delay period of a few seconds has expired, if you have activated the DC AutoSuspend Comfort Function. Security You have the possibility of protecting your device against external access by means of this function. Some one-off settings will have to be made before you will be able to use this function. Proceed as follows to do this: Storing the password and the information note 1. Go to Settings and then to Device settings by means of the main display. 2.
Making settings The following selection window, through which you will make the settings for the Security Function, will appear after you have entered the password and the information note successfully. Button Description Set here whether the device should request the password after a hard reset. Set here whether the device should request the password after a restart. Set here whether the device should request the password after the device has been switched on from the Standby mode.
SuperPIN and UUID The SuperPIN and the UUID (Universally Unique IDentifier = definite device identification) will appear on the display after you have confirmed the settings. Note Record this data in your Operating Instructions (see Page 1) and keep them in a safe place. You will need this information if you have entered the password incorrectly 3 times. The navigation device can then only be released with this information.
Making subsequent settings Start the Security Function if you have already entered a password and would like to make a subsequent setting or to change the password. The following display will appear: Button Description Change the password or the information text Authentication settings(see Page 17, Making settings) Display SuperPIN and UUID (see Page 18) Reverses the complete security function. All security settings and passwords will have been deleted after this function has been carried out.
Password Request A password request will appear at the restarting of the device, according to the setting, if you have established a password by means of the Security Function. 1. Enter the password stored by you by means of the keyboard. Note The password will be displayed in the form of small stars (****). 2. Click on the question symbol to have the information note displayed, if you have forgotten the password and need the Help setting. 3. Click on to confirm the entry.
Resetting the Navigation System You can reset your navigation system if it is no longer reacting or working properly. This option restarts the navigation system, without reinstallation being necessary. A reset is often used in order to reorganise the memory. In doing so all programs that are running are interrupted and the working memory is reinitialised. You can carry out two different Reset procedures with your device.
Navigation Safety Instructions for Navigation The bundled product CD/DVD contains a comprehensive instruction manual. General Instructions Do not adjust or configure the navigation system whilst driving, this is to protect yourself and others from accidents! In the event that you do not understand the voice instruction or if you are in any doubt about what to do at the next intersection, then the map or arrow displayed on the screen will provide you with a quick orientation.
Notes for Use in a Vehicle Take care that the holder does not present any risk to safety, even in the case of an accident, when installing it. Take care that the cable does not impede any safety components. The display of your navigation system may show “light reflections”. Please take care of not being “blinded” during operation. Do not mount the components within the operating range of any airbags. Check the secure adherence of the suction cup at regular intervals.
Aerial Orientation The aerial must have unrestricted access to the sky to receive GPS satellite signals. Place the aerial as horizontally as possible for this reason. Try out aerial and installation possibilities in the vehicle if the reception is inadequate. I. Mounting the Car Holder Attention! Only fix the holder for the navigation system to the windscreen, if it does not impede the view.
Note Clean the windscreen thoroughly with a glass cleaner. Warm the disk and the nipple slightly at temperatures below 15° C. Place the holder with the suction head directly onto the wind screen and press the lever on the suction head downwards. The sucker will attach itself to the background firmly. II. Attaching the Navigation System 1. Connect the car adapter and, if necessary, the TMC aerial to your navigation system and insert the memory card. 2. Place the device below in the centre of the holder. 3.
III. Connecting the Car Adapter (similar picture) 1. Plug the jack () of the connection cable into the corresponding receptor at the bottom of your navigation system. 2. Insert the power adapter () into the cigar lighter socket ensuring, that it will not lose contact while driving. This could cause a malfunction. Note Remove the power adapter from the cigarette lighter socket when ending a trip or when parking the car for a extended period of time. Otherwise the car battery could be drained.
IV. Starting the Navigation Software Note Your memory card will always have to be inserted into the device during the use of the navigation system, if the card contains (additional) mapping material. It will be necessary to carry out a reset to restart the navigation system if the memory card has been removed while the system was being used (see page 21). According to the navigation system the reset is carried out automatically. 1. Switch on your navigation system. 2.
Warning function for traffic monitoring points The following display will appear if the warning function for traffic monitoring points (optional) has been installed: Confirm with , if you want to use navigation with the warning function for traffic monitoring points. Tap on the Configure special functions interface in the Settings Menu, in order to configure the warning function. The following screen appears.
Tap on Speed cam (stationary) here, in order to make the settings for the ‘radar fixes’: Here, you have the option of having the traffic monitoring points represented on a map or faded out. You can also set whether you would like to be informed by acoustic signals before reaching a traffic monitoring point. Acoustic information about a traffic monitoring point will be given by a warning sound approx. 15 seconds before it is reached. Then, another double warning sound will be given approx.
Note Please pay attention to the fact that traffic monitoring points are not preset in all countries. * Legal remark The use of devices that warn about traffic monitoring systems (like “speed traps”) is prohibited in some countries, i. e. Germany, Ireland and Switzerland. Please obtain information about the legal situation and apply the warning function only where allowed. We cannot be held liable for damages caused by the warning function.
Speech commands (optional) The Speech Entry mode can be activated by means of the function during navigation. A short information sound will indicate that the navigation system is ready for the speech entry.
Main menu You will be able to call up the most recent destination by speech in the Main Menu. To do this, you will speak the text appearing in the speech bubble above one of the highest three buttons. The ‘Most recent place’ button will appear in the case of more than one most recent destination. This can also be operated by speech and will open a list with the most recent places.
In maps Auto zoom Centre [View | Map | Map view] | centre [[the] map] enlarge | zoom in reduce | zoom out quick menu In lists It will be possible to address either the list entries themselves or the number allocated to them with speech, according to the speech bubble displayed. The buttons below the lists can also be addressed with speech if they are marked with a speech bubble.
Commands during the entry of a street You will it be able to change the value previously entered with the ‘Change place/post code’ command. Use the ‘I don’t know’ or ‘Start destination guidance’ command as the entry.
Handsfree Facility by means of Bluetooth (optional) The Bluetooth technology serves to bridge short distances wirelessly. Bluetooth devices transmit data wirelessly, so that other devices that also support this technology can communicate with each other without cables. Both devices will have to be adjusted to each other (pairing), before you will be able to use your navigation system as handsfree equipment with your Bluetooth mobile phone.
Overview of the Main Screen Button Name Description Course of call Displays the course of calls put through and received. News View the postbox of your mobile phone through this symbol. You will be able to receive, write and send messages. Telephone Call the contacts stored in the mobile phone through Book this symbol. The support of this function depends on the respective mobile. Back Previous Page of the main display. Delete Delete the number entered by means of the keyboard with this field.
Synchronous telephone book – Settings for the automatic synchronisation between the navigation device and a mobile phone telephone Setting of the basic volume of the microphone and the loudspeaker. Pairing the Navigation Device and the Mobile Phone 1. Activate the Bluetooth function on your mobile phone. Note Each mobile phone uses different paths to do this. Read the instructions of your mobile phone under all circumstances for this reason. 2.
Accepting incoming calls Button Description Accept calls Reject/terminate calls Making Calls 1. Tap on the keypad in the main Bluetooth screen and enter the number that you wish to call. 2. Start the call with 38 .
During a Call Button Description End call Volume settings for microphone and loudspeaker Return the conversation to your mobile Handsfree Facility by means of Bluetooth (optional) 39
MP3 Player (optional) Depending on the software equipment your navigation system is equipped with a MP3- Player. Start the MP3 player from the menu by tapping the ‘MP3 Player’ switch area. All the MP3 files located on a memory card can be taken into a List of Favourites and will be available for replay. (The memory card must not be write-protected in this case.) Overview of the Main Screen Button Description Reduces the screen brightness to a minimum, to save electricity. Determine/add bookmarks.
You will make the settings of the MP3 player here. Select a Title and Move it into the List of Favourites Tap on and select the title that you would like to move into the List of Favourites, in order to select a title. will have three possibilities of marking the title here: Tap on in order to mark all the titles, including all sub-directories. Tap on in order to mark all titles currently in view. Tap on to delete all marks within a directory. The selected titles will be indicated by a .
List of Favourites You will reach the List of Favourites by tapping on the You will delete all titles with . You will delete individual titles with Confirm with : . , in order to take over the new selection into the List of Favourites. List of the established bookmarks You will reach the list of the established bookmarks by clicking on the You will delete all bookmarks with the symbol. You will delete an individual bookmark with the Operation with the 42 symbol : symbol.
Picture Viewer (optional) Depending on the software equipment your navigation system is equipped with a Picture Viewer. You can view the jpg format images on your memory card on your navigation system, with the Picture Viewer. All the images on the memory card will be available immediately. Operating the Picture Viewer Start the Picture Viewer from the menu Other Applications by tapping on the Picture Viewer button. Alternatively, the Picture Viewer can also be started from the navigation software itself.
Full Image View Fig.: Full image view without service strip Tap in the lower area of the screen in the full image view, in order to activate the service strip: Fig.: Full image view with service strip Button Description Previous picture Turn it clockwise by 90° in stages Fade in grid Start the slide show Pause the slide show Turn it counter-clockwise by 90° in stages Next picture You will return to the miniature view by tapping in the centre of the image.
The image displayed will be subdivided into 6 fields by tapping on the in grid). symbol (fade Fig.: Full image mode with grid Tap on a square in the grid to zoom in on that area of the picture: Fig.: Zoom-in Mode Tap on the centre of the image to go back to viewing the full picture.
Travel Guide (optional) Depending on the software equipment your navigation system is equipped with a Travel Guide. The Travel Guide will supply general information about the different areas of individual towns and cities or regions in Europe, such as sights, restaurants, culture and travel information. Start the Travel Guide from the menu Other Applications by tapping on the Travel Guide button. Alternatively, the Travel Guide can also be started from the navigation software itself.
Fig. 7 Confirm with , if you want to navigate to the destination displayed. The address will then be available to the navigation software as the destination. Button Description Previous image Shows the address of the selected category Shows the available images in the selected category. Tap on this control button to navigate directly to the selected address. Note The possible selections within the Travel Guide can vary according to the software available.
Alarm Clock (waking function) (optional) Depending on the software equipment your navigation system is equipped with a Alarm Clock/waking function. Start this function from the menu Other Applications by tapping on the Alarm Clock button. The waking function can work when the device is switched off (Standby Mode / Power Saving Mode) as well as a reminder during the current navigation. Overview of the main screen This view will appear if you have not yet set up a waking time.
Description of the Interfaces Button Description Current system time Setting-up mode (Setting volumes, system time and alarm) Night mode (Standby mode) Reset/deactivate the waking function Setting the alarm time Delete the entry Confirmation interface Increase the volume / Reduce the volume Back to the previous menu Close the application Alarm Clock (waking function) (optional) 49
Setting the System Time The display of the current time will be located in the upper right corner of the screen. You can adjust it as follows: 1. Tap on 2. Tap on in the main screen. The following screen will appear: to change the time setting: Note The system time is updated by GPS reception. Pay attention to the time zone settings.
Selecting an Alarm Signal 1. To select an alarm signal touch the symbol. 2. Select the desired alarm sound and confirm the selection with . 3. Tap on the corresponding file in the Memory Card directory if you would like to select an alarm tone from the storage card and confirm again with 4. Select the desired alarm sound and confirm with . . 5. The selected alarm signal is marked by a 6. Close the application with .
Setting the Volume You can adjust the volume of the alarm signal by tapping on the interface. Note The volume configured here only relates to the alarm signal and will not change the volume of the language output of the navigation system or other functions of the system.
Snooze Function You will have the possibility of making the waking signal repeat at regular intervals by means of the Snooze function, once it has sounded at the alarm time set. 3. Tap on to activate the Snooze function. Current system time Waking time set 4. To be wakened again at the same time on the following day tap on the 5. Tap on button. to return to the screen before the alarm signal started. Ending the Alarm Clock Application 1. Tap on to deactivate the alarm time set. 2.
Sudoku (optional) Depending on the software equipment your navigation system is equipped with the game Sudoku. Start the game from the menu Other Applications by tapping on the Sudoku switch field. Sudoku is a number puzzle. The puzzle area is square and subdivided into nine sections. Each section consists of 9 smaller squares. When playing Sudoku, the aim is to fill all the 81 number fields using the numbers 1-9. Each number must only appear once in each section at the same time.
Description of the switch fields Button Description Start the game You will receive notes about a solution by tapping on this control button. Tap on the control button again to hide the notes about a solution. You will receive the solutions of the number fields by tapping on this control button. Tap on the control button again to hide the solutions. A new Sudoku will be opened by tapping on this control button.
Overview of the game field Description of the control buttons Button Description Strip of numbers to be entered Strip for the selection of the numbers to be entered in the number fields. The selected number will stand out and it will now be possible to enter it into a number field. Entry mode First, tap on the number in the strip of numbers to be entered that should appear in particular number field and then on the corresponding number field. Deletion mode Tap on the number to be deleted.
FAQ Where can I find more information on the navigation system? Detailed operating instructions for navigation can be found on the corresponding CD/DVD, which accompany your navigation system. Also use the additional Help functions that are available with a single touch of a button (usually F1 on the PC), or by selecting the Help option, as additional assistance. These aids will be provided to you while you are using the computer or the device.
Customer Service Faults and Possible Causes The navigation system no longer reacts or is behaving atypically. Carry out a reset (see page 21). The navigation system is recognised only as a guest by ActiveSync®. See information on page 63. The GPS receiver cannot be initialised or found. If a GPS signal continues not to be reported on the screen, in spite of the correct installation of the system, this can be caused by the following factors: Sufficient satellite reception is not possible.
Appendix Special CleanUp Function The CleanUp function serves the targeted deletion of data, without using a PC. Note Please use this function very carefully, because it is possible for data to be deleted that can only be entered again manually afterwards. The CleanUp function is activated when the ‘o’ is pressed in the Gopal lettering of the Main Menu, immediately after the start tone following a reset. The CleanUp function offers different options: 1.
6. Format Flash Formats the internal ‘My Flash Disk’ memory. This formatting can be necessary in the case of a prolonged removal of errors. It will be necessary to recalibrate the screen after the formatting function has been carried out. All data will be deleted from the internal ‘My Flash Disk’ memory irrevocably. 7. GPS Factory Reset Performs a factory reset of the GPS receiver. When using the GPS function after having performed a factory reset, the GPS receiver must orientate itself again.
Exit Leaving the CleanUp function and restarting the device (like reset). Note The deletion of the data must be confirmed before the action actually takes place. To do this, press on YES. There will be a corresponding report if the data to be deleted is no longer available. Please read the “Transferring Installation Files and Map Material to the Internal Memory“ chapter on Page 70, in order to recreate the files (installation files and map material) in the internal memory.
Synchronisation with the PC I. Installing Microsoft® ActiveSync® In order to transfer data between your PC and your navigation system you need the Microsoft® ActiveSync® program. The cost of the navigation system includes a license for this program which can be found on the CD/DVD. Hinweis You will not need the ActiveSync® communications software, if you are a user of the Windows Vista® / Windows ® 7 operating system.
II. Connecting with the PC 1. Press the On/Off button to start your navigation system. 2. Connect the USB cable to your navigation system. 3. Push the USB connector into a free USB port on your computer. 4. The following screen will appear after the navigation system has been connected: ActiveSync mode Mass storage mode Note The ActivSync® mode will be loaded automatically after a few seconds, if no mode has been selected. 5.
ActiveSync®-Mode Repeat the attempt to connect, if it has failed the first time, if you have selected the ActiveSync® mode. Follow the instructions on your screen. The program will now set up a partnership between your PC and navigation system. Note The navigation system must have been recognized when setting up the ActiveSync® mode, in order to be able to work with the GoPal Assistant.
GPS (Global Positioning System) GPS is a satellite-backed system for determining your position. With the help of 24 satellites revolving around the earth, it is possible to determine your position on earth with the accuracy of a few meters. The satellite signals are received by the antenna of the built-in GPS receiver, which must have a "line of sight" to at least 4 of these. Note When the line of sight is interrupted (e.g.
TMC (Traffic Message Channel) (optional) The Traffic Message Channel (TMC) is a digital radio data service that functions in a similar way to RDS and is used to transmit disruptions to traffic to a suitable reception device. The traffic information is continuously transmitted across FM. The user is less dependent on the half-hourly broadcast traffic information, because the signal is continuously transmitted.
Installing the External TMC Receiver / Connecting the TMC Diplole Aerial (optional) Installing the External TMC Receiver (only for model E4145) 1. Connect the mini-USB plug to the mini-USB connection of your device. 2. Connect the projecting antenna to the TMC receiver and attach that antenna with the aid of the suckers, at the edge of your windscreen, for example. 3. Connect the TMC receiver to the car adapter cable after you have attached the TMC receiver to your navigation system.
Working with Memory Cards Inserting Memory Cards 1. Carefully take the optional memory card out of its packing (if included). Take care not to touch or dirty the contacts. 2. Insert the memory card carefully into the card bay with contacts pointing forward. The card must lock easily. Removing Memory Cards Note Only remove the memory card if the navigation software has been closed and the device has been switched off by means of the On/Off button beforehand. Otherwise you will risk a loss of data. 1.
Data Exchange via Card Reader If you wish to copy large quantities of data (MP3 files, navigation maps) to the memory card, these can also be stored directly to the memory card. Many computers already have memory card devices. Insert the card into your computer and copy the data directly to the card. Because of the direct access you can achieve a much higher transfer rate compared to using ActiveSync®.
Alternate method of installing Navigation Software (using a memory card) The software for your navigation system can be installed directly from a memory card. The pre-installed software may have to be uninstalled beforehand (see special Clean Up function, Page 59). You will be requested to install the navigation software during the initial adjustment. Please proceed as follows: 1. Remove the memory card from the packaging carefully. Ensure the contacts are not touched or soiled. 2.
Specifications Parameter Information Power supply CA-051-00U-00 / CA-0511MH-2F (Mitac) Power supply cable for a cigarette lighter Input Output 12-24V DC, 800mA / Sicherung 2A (T2AL/250V) 5V / 1A (max.) Battery Li-Ion, 3.7 V Earphones Stereo earphones (3.5 mm) Memory card type SD Bluetooth (optional) Class 2 USB interface USB 2.0 Dimensions approx. 130 mm x 80 mm x 19,5 mm Weight incl. battery approx.
Model Overview Bluetooth TMC via external TMC receiver (via Mini USB) TMC via integrated TMC receiver and TMC dipole antenna Model Microphone E4145 E4245 E4445 = Equipment available = Equipment not available 72 Model Overview
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Conditions of Warranty for the United Kingdom Restricted Warranty I. General Conditions of Warranty 1. General This warranty covers defects relating to workmanship and manufacture in MEDION products.
your operating and/or using the product other than as instructed in the accompanying documentation; damage caused in transit as a result of your negligence in packaging of the product; and/or otherwise than in accordance with the terms of this warranty; This warranty shall be void and you may be required by MEDION to reimburse MEDION for the reasonable costs of postage and packaging before MEDION will return the product to you.
2. Scope Subject to any exclusions set out within this warranty, where there is a defect in your MEDION product covered by this warranty, MEDION will repair or replace the MEDION product. The decision whether to repair or replace the product will be made solely at the discretion of MEDION.
3. Exclusion from warranty To the extent permitted by law, this warranty shall be void in the event that defects or loss caused by: a. failure and damage resulting from the operation of the product in an environment other than that recommended in the accompanying user or instruction manual (e.g. in direct sunlight or in a damp room); b. accidental damage; c. use other than in accordance with the accompanying user or instruction manual; d.
II. Special warranty conditions for MEDION PC, notebook, pocket PC (PDA) and navigation devices (PNA) The following terms apply to MEDION PC, notebook, desktop, pocket PC and laptop products and optional items included with such products. If one of these items has a fault, you also have a warranty claim for its repair or replacement, from MEDION. The warranty covers the costs of materials and labour for repairing or replacing the defective MEDION product or the optional item in question.
III. Special warranty conditions for repair on site or replacement on site If a claim for repair or replacement on site is included within the terms of the warranty card provided with the product, the special warranty conditions for repair or replacement of your MEDION product on site apply. The following provisions must be made by you for carrying out repairs or replacements on site: MEDION or its authorised personnel must have unrestricted, safe and immediate access to the products.
Index A Accessing Memory cards .................... 68 ® ActiveSync -Mode ............................... 64 Additional card material ...................... 69 Aerial Orientation ............................... 24 AlarmClock (Wake up function) Ending the application .................... 53 Selecting an alarm signal ................ 51 Setting the system time .................. 50 Setting the volume ......................... 52 Snooze function.............................. 53 Interfaces ....................
Hotline ........................................... 58 Specifications ..................................... 71 Speech commands............................. 31 Standards FCC Compliance Statement ........... 73 R&TTE .............................................. 4 Starting the navigation software ........ 27 Sudoku Description of the switch fields....... 56 Main screen ................................... 54 SuperPIN ...................................... 18, 19 Supplied Items ................................
82 Index