2,7 cm / 5“ Navigation System MEDION® GoPal® E5x70 MSN 4005 1597 E5x70 Generic EN Gopal 7.5 MSN 4005 1597 Cover.indd 1 Instruction Manual 21.07.
Table of contents 1. 2. 3. 4. 5. 6. 7. 8. 9. About these Instructions............................................................................. 5 1.1. Symbols and Key Words Used in these Instructions .................................. 5 1.2. Proper Use ................................................................................................................. 6 1.3. Information about Conformity ......................................................................... 6 Safety Instructions....
10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 9.2. Aerial Orientation .................................................................................................30 9.3. Mounting the Car Holder ...................................................................................30 9.4. Attaching the Navigation System ..................................................................31 9.5. Connecting the Car Adapter ............................................................................
23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 22.2. Connecting with the PC .....................................................................................67 22.3. Working with Microsoft® ActiveSync® ..........................................................69 GPS (Global Positioning System) .............................................................. 70 TMC (Traffic Message Channel) (optional) ............................................... 71 24.1. Premium TMC (optional) ......................
Personal Data Take a note for your proof of ownership: Serial Number .......................................................................................................................... Password .......................................................................................................................... Information note .......................................................................................................................... SuperPIN .......................................
1. About these Instructions Read these operating instructions carefully before using the appliance for the first time. Note the warnings on the unit and in the operating instructions. Always keep the operating instructions close to hand. If you sell the equipment or give it away, make sure you also hand over these instructions and the warranty card. 1.1.
1.2. Proper Use The device is designed as a receiver of GPS signals (position data provided from satellites) for navigation and the determination of location. The device is intended for private use only and not for industrial/commercial use. Please note that we shall not be liable in case of improper use: • Do not modify the device without our consent and do not use any auxiliary equipment which we have not approved or supplied. • Use only spare parts and accessories which we have supplied or approved.
2. Safety Instructions 2.1. Dangers for children and people with reduced ability to operate electronics • Do not allow small children to play unattended with electrical equipment. Children are incapable of judging potential risks properly. • Keep the appliance and its accessories out of reach of children. DANGER! Keep plastic packaging out of reach of children. There is a risk of suffocation. 2.2. Operational Safety • Please read this section carefully and follow all the instructions provided.
• If the housing of the appliance becomes damaged or liquid may have leaked into it the components must be checked by Customer Service in order to avoid damage! 2.3. Never carry out repairs yourself WARNING! Never try to open or repair the appliance yourself. • Please contact our Service Centre if you encounter technical problems with your appliance. • In the event a repair becomes necessary, please use Medion authorised Service Partners.
2.6. Ambient Temperature • The appliance will operate effectively at an ambient temperature of between +32°F and +95°F (0 °C and 35 °C) and at a relative humidity of between 10 % and 90 % (non-condensing). • In the powered down state the appliance can be stored at between -4°F and +140°F (-20 °C + to 60 °C). • Store the appliance in a safe location, away from high temperatures (e.g. when parking or from direct sunlight). 2.7.
2.8. Connection When connecting your appliance it is important to observe the following instructions: 2.8.1. Power supply through Car Adapter • The car adapter should only be connected to the lighter socket , truck battery = DC 24V ). If of a car (car battery = DC 12V you are in any doubt about the power source in your car, please contact your car manufacturer. 2.9. Cabling • Arrange cables so that they do not cause unnecessary obstruction or risk entanglement or snaring. E.g.
2.11. Maintenance CAUTION! There are no user-serviceable parts which require cleaning inside the housing of the appliance. You can prolong the life of the appliance by taking the following simple steps: • Always remove the power plug and all connecting cables before cleaning. • Clean the appliance only with a damp, lint-free cloth. • Do not use solvents, caustic or gaseous cleaners. 2.12. Care of the Display • Avoid scratching the display surface as this may be easily damaged.
3. Supplied Items Please check the condition of items supplied and check for missing items using the list below. If you find your package to be incomplete, please forward to us all claims for missing items within 14 days from the date of purchase.
4. Views 4.1. Front Components 1 2 3 Ref. 1 Component Battery Charge Indicator Description The LED will flash orange during the charging process. It will shine constant green when the accumulator is fully charged. Displays the output of your appliance. Tap on the screen with your finger, a stylus or a „blunt“ tip to select menu commands or enter data. 2 Touch Screen 3 Microphone CAUTION! To avoid damaging the screen, do not touch it with square-edged or sharp objects.
4.2. Back Components 4 Ref. Component 4 Loudspeaker Description Plays back music, language statements and warnings. 4.3. Top Components 5 Ref. 5 Component On-/ Off button Description Turn the device on or off by pressing and holding the On/Off button. You will switch to the stand-by mode or reactivate the device by quickly pressing the button. 14 of 82 E5x70 Generic EN Gopal 7.5 MSN 4005 1597 Content.indd 14 21.07.
4.4. Left Components 6 Ref 6 7 Component Memory card insertion slot with cover microUSBConnector 7 Description Accepts an optional memory card for removable storage. Connection to external power supply as well as connection for connecting to a PC by means of the USB cable (for data matching) PLEASE NOTE! Close the cover again after using the memory card each time. 15 of 82 E5x70 Generic EN Gopal 7.5 MSN 4005 1597 Content.indd 15 21.07.
5. Initial Set up The following is a step by step guide to assist in the initial Set-up of the navigation system. Start by removing the protective plastic from the display. 5.1. Charging the Battery The battery of your navigation system can be charged in the following ways: • Using the supplied car adapter or • using a suitable USB cable.
5.2. Power Supply 5.2.1. Car Adapter Plug the jack of the connection cable into the corresponding receptor of your navigation system. Insert the power adapter into the cigar lighter socket ensuring, that it will not lose contact while driving. This could cause a malfu. 5.2.2. Alternative Possibility of Charging the Battery The battery will charge as soon as you connect your navigation device to a switched-on PC or notebook by means of a USB cable.
The following options will be available to you subsequently: • You will receive a short introduction about bringing your navigation device and • the navigation software through the switch. The mounting in the vehicle, entering and administering navigation destinations, general instructions for use, etc. are described here, among other aspects. You will start the Settings assistant for the configuration of the basic settings of • switch.
5.3.1. Main Views You will find an overview of the different main views of the Main menu here. Button Description Main Screen Viewing maps Navigation menu Extras Settings 19 of 82 E5x70 Generic EN Gopal 7.5 MSN 4005 1597 Content.indd 19 21.07.
PLEASE NOTE! You will not be able to select the Navigation menu or the settings if the navigation software does not find any map files in the device or on a memory device. Then the Extras menu will appear automatically. Brief pressure on the on/off button will be enough to switch the device on or off, provided that your navigation system is connected to an external source of electricity or is running in battery operation (standby mode).
To switch off your navigation system briefly press the On-/Off switch . The following screen will appear: You have three possible choices: Button Description Cancel/Back Return to previous view with this key, if you have accidently called up this screen. Standby Mode (Energy saving mode) The device will go into Standby Mode if this key is clicked. Reset You can carry out a reset by clicking this key.
7. Security You have the possibility of protecting your device against external access by means of this function. Some one-off settings will have to be made before you will be able to use this function. Proceed as follows to do this: 7.1. Storing the password and the information note Go to Settings and then to Device settings by means of the main display. Click on Security, in order to start the respective function. The following display will appear: Click on , in order to enter a password.
7.2. Making settings The following selection window, through which you will make the settings for the Security Function, will appear after you have entered the password and the information note successfully. Button Description Set here whether the device should request the password after a hard reset. Set here whether the device should request the password after a restart. Set here whether the device should request the password after the device has been switched on from the Standby mode.
7.3. SuperPIN and UUID The SuperPIN and the UUID (Universally Unique IDentifier = definite device identification) will appear on the display after you have confirmed the settings. PLEASE NOTE! Record this data in your Operating Instructions and keep them in a safe place. You will need this information if you have entered the password incorrectly 3 times. The navigation device can then only be released with this information. 24 of 82 E5x70 Generic EN Gopal 7.5 MSN 4005 1597 Content.indd 24 21.07.
7.4. Making subsequent settings Start the Security Function if you have already entered a password and would like to make a subsequent setting or to change the password. The following display will appear: Button Description Change the password or the information text Authentication settings (see page 23, Making settings) Display SuperPIN and UUID (see page 24) Reverses the complete security function. All security settings and passwords will have been deleted after this function has been carried out.
7.4.1. Password Request A password request will appear at the restarting of the device, according to the setting, if you have established a password by means of the Security Function. Enter the password stored by you by means of the keyboard. PLEASE NOTE! The password will be displayed in the form of small stars (****). Click on the question symbol to have the information note displayed, if you have forgotten the password and need the Help setting.
8. Resetting the Navigation System You can reset your navigation system if it is no longer reacting or working properly. This option restarts the navigation system, without reinstallation being necessary. A reset is often used in order to reorganise the memory. In doing so all programs that are running are interrupted and the working memory is reinitialised. You can carry out two different Reset procedures with your device. 8.1.
9. Navigation The bundled product CD/DVD contains a comprehensive instruction manual. 9.1. Safety Instructions for Navigation • Do not adjust or configure the navigation system whilst driving, this is to protect yourself and others from accidents! • In the event that you do not understand the voice instruction or if you are in any doubt about what to do at the next intersection, then the map or arrow displayed on the screen will provide you with a quick orientation.
• The direction statements of the navigation system given do not release the driver of the vehicle from his or her duty of care or personal responsibility. • Plan routes before you leave. If you want to plan a new route whilst on the road pull over and stop driving. • In order to receive the GPS signal correctly, keep away from metal objects as they may hinder reception. Attach the navigation system onto the inside of the windscreen or near the windscreen with the suction cup.
9.2. Aerial Orientation The aerial must have unrestricted access to the sky to receive GPS satellite signals. Place the aerial as horizontally as possible for this reason. Try out aerial and installation possibilities in the vehicle if the reception is inadequate. 9.3. Mounting the Car Holder CAUTION! Only fix the holder for the navigation system to the windscreen, if it does not impede the view. Only use the car holder with the navigation device inserted in order to prevent hazards.
9.4. Attaching the Navigation System Connect the car adapter and, if necessary, insert the memory card. Place the device below in the centre of the holder. Press it gently backwards until it engages audibly. 1 2 (similar picture) Now you will be able to place the complete unit on the cleaned windscreen or the suction. 31 of 82 E5x70 Generic EN Gopal 7.5 MSN 4005 1597 Content.indd 31 21.07.
9.5. Connecting the Car Adapter Plug the jack of the connection cable into the corresponding receptor of your navigation system. 2 1 Insert the power adapter into the cigar lighter socket ensuring, that it will not lose contact while driving. This could cause a malfunction. PLEASE NOTE! Remove the power adapter from the cigarette lighter socket when ending a trip or when parking the car for a extended period of time. Otherwise the car battery could be drained.
9.6. Starting the Navigation Software PLEASE NOTE! Your memory card will always have to be inserted into the device during the use of the navigation system, if the card contains (additional) mapping material. It will be necessary to carry out a reset to restart the navigation system if the memory card has been removed while the system was being used (see page 27). According to the navigation system the reset is carried out automaticall. Switch on your navigation system.
10. Warning Function for Traffic Monitoring Points (optional) The following display will appear if the warning function for traffic monitoring points has been installed: Confirm with , if you want to use navigation with the warning function for traffic monitoring points. Tap on the Configure special functions interface in the Settings Menu, in order to configure the warning function. The following screen appears. Tap on POI-Warner: 34 of 82 E5x70 Generic EN Gopal 7.5 MSN 4005 1597 Content.indd 34 21.07.
Tap on Speed cam (stationary) here, in order to make the settings for the ‘radar fixes’: Here, you have the option of having the traffic monitoring points represented on a map or faded out. You can also set whether you would like to be informed by acoustic signals before reaching a traffic monitoring point. 35 of 82 E5x70 Generic EN Gopal 7.5 MSN 4005 1597 Content.indd 35 21.07.
Acoustic information about a traffic monitoring point will be given by a warning sound approx. 15 seconds before it is reached. Then, another double warning sound will be given approx. 7 seconds before it is reached. Four warning sounds will give information that the speed is too high. In addition, the distance to a monitoring point will be indicated by a bar indicating closeness (left lower edge of the display).
11. Speech Commands (optional) The Speech Entry mode can be activated by means of the function during navigation. A short information sound will indicate that the navigation system is ready for the speech entry. Explanation of the symbol: • ( ) optional words; • [ ] Fillers • „|“Alternatives; • < > Content displayed can be spoken The following commands will be possible here according to the current view: PLEASE NOTE! Speak the commands loudly and clearly in the direction of the navigation system.
Range of validity List commands Main menu Current route / Route information/ Overview map Volume settings Command next page | scroll down previous page | scroll up [enter] new destination | Enter address [show] map [ view ] settings (other | additional) (applications) | additional applications | extras directions| route description routes | route options | route settings | Routes (traffic [jam] | congestion) (information | situation | info | conditions) Traffic conditions current position destination [a
Range of validity Map Command [display|show] (compass [view] | G P S view) no map | map off | (switch off | hide) map three dimensional) [view | map | perspective] [display|show] (turn icons | arrow | arrow view | direction changes) [display|show] (2 D | two dimensional) [view | map | perspective] [display|show] [view|orientation] [in] (direction of (travel | motion) | driving direction) Map optimised | optimise map| map orientation optimised | orientation optimised [display|show] [map] (oriented north | n
12. Bluetooth (optional) The Bluetooth technology serves to bridge short distances wirelessly. Bluetooth devices transmit data wirelessly, so that other devices that also support this technology can communicate with each other without cables. Both devices will have to be adjusted to each other (pairing), before you will be able to use your navigation system as handsfree equipment with your Bluetooth mobile phone.
Button Name Description Back Previous Page of the main display. Delete Delete the number entered by means of the keyboard with this field. Calling Select the number entered by means of the keyboard with this field. Keypad Enter the digits of the telephone number to be called by means of the keyboard. Volume Set the volume of the microphone and the loudspeaker by means of this symbol.
Select the option (Pairing). The search for a blue-tooth device will start automatically during the first setting up of the device. You will start the search again with ‘Search for mobile’. Select the corresponding mobile phone from the list. Tap on the Pair switch and then on the Couple with mobile switch to confirm. Your mobile phone will recognize the navigation device. You will be requested to enter a 4-digit PIN code. This is 1 2 3 4 for your navigation device.
12.5. Making Calls Tap on the keypad in the main Bluetooth screen and enter the number that you wish to call. Start the call with . 12.6. Show and Read Out Incoming Messages You will be able to read incoming messages or also to have them read out in addition, if your mobile supports these functions. Activate the Show and read out option under Settings > Message for this. The telephone number or the contact from the Phone Book will be read out initially in the case of an incoming message.
12.7. During a Call Button Description End call Mute for microphone and volume settings Return the conversation to your mobile 44 of 82 E5x70 Generic EN Gopal 7.5 MSN 4005 1597 Content.indd 44 21.07.
13. MP3 Player (optional) Depending on the software equipment your navigation system is equipped with a MP3 Player. Start the MP3 player from the menu Extras by tapping the MP3 Player switch area. All the MP3 files located on a memory card can be taken into a List of Favourites and will be available for replay. (The memory card must not be writeprotected in this case.) 13.1. Overview of the Main Screen Button Description Reduces the screen brightness to a minimum, to save electricity.
13.2. Select a Title and Move it into the List of Favourites Tap on and select the title that you would like to move into the List of Favourites, in order to select a title. You will have three possibilities of marking the title here: Tap on in order to mark all the titles, including all sub-directories. Tap on in order to mark all titles currently in view. Tap on to delete all marks within a directory. The selected titles will be indicated by a .
13.2.1. List of Favourites You will reach the List of Favourites by tapping on the You will delete all titles with : . . You will delete individual titles with Confirm with , in order to take over the new selection into the List of Favourites. 13.3. List of the established bookmarks You will reach the list of the established bookmarks by clicking on the You will delete all bookmarks with the symbol. You will delete an individual bookmark with the Operation with the bookmarks.
14. Picture Viewer (optional) Depending on the software equipment your navigation system is equipped with a Picture Viewer. You can view the jpg format images on your memory card on your navigation system, with the Picture Viewer. All the images on the memory card will be available immediately. 14.1. Operating the Picture Viewer Start the Picture Viewer from the menu Extras by tapping on the Picture Viewer button. Alternatively, the Picture Viewer can also be started from the navigation software itself.
14.2.1. Full Image View Fig.: Full image view without service strip Tap in the lower area of the screen in the full image view, in order to activate the service strip: Fig.: Full image view with service strip Button Description Turn it clockwise by 90° in stages Fade in grid Previous picture Start the slide show Pause the slide show Next picture Turn it counter-clockwise by 90° in stages 49 of 82 E5x70 Generic EN Gopal 7.5 MSN 4005 1597 Content.indd 49 21.07.
You will return to the miniature view by tapping in the centre of the image. The image displayed will be subdivided into 6 fields by tapping on the symbol (fade in grid). Fig.: Full image mode with grid Tap on a square in the grid to zoom in on that area of the picture: Fig.: Zoom-in Mode Tap on the centre of the image to go back to viewing the full picture. 50 of 82 E5x70 Generic EN Gopal 7.5 MSN 4005 1597 Content.indd 50 21.07.
15. Travel Guide (optional) Depending on the software equipment your navigation system is equipped with a Travel Guide. The Travel Guide will supply general information about the different areas of individual towns and cities or regions in Europe, such as sights, restaurants, culture and travel information. Start the Travel Guide from the menu Extras by tapping on the Travel Guide button. 15.1.
Fig. 5 Fig. 6 Fig. 7 Confirm with Navigate, if you want to navigate to the destination displayed. The address will then be available to the navigation software as the destination. Button Description Previous image Address Pictures Navigate Shows the address of the selected category Shows the available images in the selected category. Tap on this control button to navigate directly to the selected address.
16. Where am I? (optional) About the Where am I? function Receive information about your current location, insofar as a GPS signal is available. Tap in Extras one Where am I? In order to add the current location to your favourites, tap on Save current position. 53 of 82 E5x70 Generic EN Gopal 7.5 MSN 4005 1597 Content.indd 53 21.07.
17. Eco Expert (optional) This function provides you with information about the environmental impact of your driving style using a points system and contains tips for environmentally friendly driving behaviour (Eco tips). 17.1. Overwiev of the Main Screen Tap in Extras on Eco Expert. You will find a current overview under Eco points today.
You can reset the points score at any time by tapping on the Reset points button. You can display the statistics for the last 30 days via the option Eco points last 30 days. Tap on Settings on the main screen to amend the various settings options: 55 of 82 E5x70 Generic EN Gopal 7.5 MSN 4005 1597 Content.indd 55 21.07.
18. Alarm Clock (waking function) (optional) Depending on the software equipment your navigation system is equipped with a Alarm Clock/waking function. Start this function from the menu Extras by tapping on the Alarm Clock button. The waking function can work when the device is switched off (Standby Mode / Power Saving Mode) as well as a reminder during the current navigation. 18.1. Overview of the Main Screen This view will appear if you have not yet set up a waking time.
18.2.1. Setting the System Time The display of the current time will be located in the upper right corner of the screen. You can adjust it as follows: Tap on Tap on in the main screen. The following screen will appear: to change the time setting: PLEASE NOTE! The system time is updated by GPS reception. Pay attention to the time zone settings. 57 of 82 E5x70 Generic EN Gopal 7.5 MSN 4005 1597 Content.indd 57 21.07.
18.3. Selecting an Alarm Signal To select an alarm signal touch the symbol. Select the desired alarm sound and confirm the selection with . Tap on the corresponding file in the Memory Card directory if you would like to select an alarm tone from the storage card and confirm again with . Select the desired alarm sound and confirm with The selected alarm signal is marked by a Close the application with . . . 58 of 82 E5x70 Generic EN Gopal 7.5 MSN 4005 1597 Content.indd 58 21.07.
18.4. Setting the Volume You can adjust the volume of the alarm signal by tapping on the interface. PLEASE NOTE! The volume configured here only relates to the alarm signal and will not change the volume of the language output of the navigation system or other functions of the system. 59 of 82 E5x70 Generic EN Gopal 7.5 MSN 4005 1597 Content.indd 59 21.07.
18.5. Snooze Function You will have the possibility of making the waking signal repeat at regular intervals by means of the Snooze function, once it has sounded at the alarm time set. Tap on to activate the Snooze function. End the snooze function in order to be woken again on the following day at the set time. Exit the alarm display by clicking on . You will then be returned to the view shown before the display for the alarm time setting. 18.5.1.
19. Sudoku (optional) Depending on the software equipment your navigation system is equipped with the game Sudoku. Start the game from the menu Extras by tapping on the Sudoku switch field. Sudoku is a number puzzle. The puzzle area is square and subdivided into nine sections. Each section consists of 9 smaller squares. When playing Sudoku, the aim is to fill all the 81 number fields using the numbers 1-9. Each number must only appear once in each section at the same time.
Button Description Settings You have the following possibilities in the Settings menu: The current game will be stored by tapping on this control button. You will load a game that you have started onto the screen by tapping on this control button. Delete a stored game status. You can set the level of difficulty here. Back to the current game. 19.3. Overview of the Game Field 19.3.1.
20. Traffic Rules Europe You will receive a range of basic information about the traffic regulations of the respective country and its emergency numbers by means of the switch in the Extras menu. Select the required country to have the information displayed to you (all information without liability). 63 of 82 E5x70 Generic EN Gopal 7.5 MSN 4005 1597 Content.indd 63 21.07.
21. Special CleanUp Function The CleanUp function serves the targeted deletion of data, without using a PC. PLEASE NOTE! Please use this function very carefully, because it is possible for data to be deleted that can only be entered again manually afterward. The CleanUp function is activated when the ‘o’ is pressed in the Gopal lettering of the Main Menu, immediately after the start tone following a reset. The CleanUp function offers different options: 1.
7. GPS Factory Reset Performs a factory reset of the GPS receiver. When using the GPS function after having performed a factory reset, the GPS receiver must orientate itself again. This process may take a while. 8. DC AutoSuspend/Wakeup You can select here when your navigation system should go into Standby mode automatically after the withdrawal of the external power supply.
9. Auto Mass Storage Here you can control the behaviour of your device when connected to a USB port. In the setting Auto Mass Storage: Off - You can select between mass storage and ActiveSync® modes. In Auto Mass Storage: On - Your device will automatically be set to the mass storage mode. Exit Leaving the CleanUp function and restarting the device (like reset. PLEASE NOTE! The deletion of the data must be confirmed before the action actually takes place. To do this, press on YES.
Insert the CD/DVD and wait until the program starts automatic. PLEASE NOTE! If it does not function, the Auto Run function is probably deactivated. The Setup program on the CD/DVD must be started, to start installation manually den. Choose the language, click then Install ActiveSync® and follow the instructions on the screen. PLEASE NOTE! When installing the GoPal Assistant, ActiveSync® will be installed automaticalllliert. 22.2.
22.2.1. Mass Storage mode You will be able to use your navigation device as a detachable device (e.g. a USB stick) in the Mass Storage mode. Two drives, the internal memory of the navigation system itself and the (optional) memory card, if it has been inserted into the device, will be connected to do this. PLEASE NOTE! No further entries can be made on the device at the same time if you are in this mode.
22.3. Working with Microsoft® ActiveSync® ActiveSync® will be started automatically if you connect your navigation system to the PC. The program will check whether the device is one with which a partnership has been entered. If this is the case, the changes that have taken place on the PC and on the navigation system since the last synchronisation will be compared and adjusted to each other.
23. GPS (Global Positioning System) GPS is a satellite-backed system for determining your position. With the help of 24 satellites revolving around the earth, it is possible to determine your position on earth with the accuracy of a few meters. The satellite signals are received by the antenna of the built-in GPS receiver, which must have a “line of sight” to at least 4 of these. PLEASE NOTE! When the line of sight is interrupted (e.g.
24. TMC (Traffic Message Channel) (optional) The Traffic Message Channel (TMC) is a digital radio data service that functions in a similar way to RDS and is used to transmit disruptions to traffic to a suitable reception device. The user is less dependent on the half-hourly broadcast traffic information, because the signal is continuously transmitted. Apart from this, important information, as in the case of an accident in the road ahead, can be passed on immediately.
25. Working with Memory Cards 25.1. Inserting Memory Cards Carefully take the optional memory card out of its packing (if included). Take care not to touch or dirty the contacts. Insert the memory card carefully into the card bay with contacts pointing forward. The card must lock easily. 25.2. Removing Memory Cards PLEASE NOTE! Only remove the memory card if the navigation software has been closed and the device has been switched off by means of the On/Off button beforehand.
25.3. Additional Card Material Your navigation system is already equipped with digitalised map material in the internal memory and/or memory card at the factory. Depending on the configuration, additional maps may be included on your navigation CD/DVD. You will be able to transfer these cards to a memory card immediately. It is recommended that you use an external card reader (see also page 72).
25.3.3. Transferring Installation Files and Map Material to the Internal Memory PLEASE NOTE! The navigation system must be connected to a computer by means of ActiveSync® for the transfer of the data. Your device has an internal, permanent memory, which is located in the \My Flash Disk directory. You will be able to make this directory, and others, visible with ActiveSync®, by means of the Search option. Directories and files can be manipulated as in Windows Explorer.
27. Customer Service 27.1. Faults and Possible Causes The navigation system no longer reacts or is behaving atypically. Carry out a reset. The navigation system is recognised only as a guest by ActiveSync®. See information on page 66. The GPS receiver cannot be initialised or found. If a GPS signal continues not to be reported on the screen, in spite of the correct installation of the system, this can be caused by the following factors: Sufficient satellite reception is not possible.
27.3. Transport When transporting the appliance please follow the instructions below: • After transporting the appliance wait until the unit has acclimatised and adjust to surrounding conditions (e.g. room temperature and humidity) prior to use. In the event of large fluctuations in temperature or humidity, condensation or moisture may form inside the appliance. This can cause an electrical shortcircuit.
29. Specifications Parameter Information Mitac CA-052-00U-00 Power supply Power supply cable for a cigarette lighter Input: 12-24V DC 1300 mA Fuse: F2AL/250V 2A (max.) Output: 5V Battery Li-Ion, 3.7 V Memory card type Micro-SD Bluetooth (optional) Class 2 USB interface USB 2.0 Dimensions approx. 136 mm x 14 mm x 86 mm Gewicht inkl. Akku approx.
31. Regulatory information Note: For regulatory identification purposes, your device is assigned a model number of E4x70. 31.1. Regulations statements 31.1.1. European notice Products with the CE marking comply with Radio & Telecommunication Terminal Equipment Directive (R&TTE) (1999/5/EC), the Electromagnetic Compatibility Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) - issued by the Commission of the European Community.
32. FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
34. Index A Accessing Memory cards ......................... 72 ActiveSync®-Mode ..................................... 68 Additional card material .......................... 73 Aerial Orientation ....................................... 30 Alarm Clock Ending ....................................................... 60 Interfaces .................................................. 56 Main Screen ............................................. 56 Selecting an Alarm Signal...................
Mounting the Car Holder.................... 30 Starting the Navigation Software .... 33 O On-/ Off button ........................................... 14 Operating Switching on/off the device .............. 20 Operating Environment ..............................8 Operational Safety ........................................7 P Password........................................................ 22 Picture Viewer Main screen.............................................. 48 Operation ................................
82 of 82 E5x70 Generic EN Gopal 7.5 MSN 4005 1597 Content.indd 82 21.07.
12,7 cm / 5“ Navigation System MEDION® GoPal® E5x70 MSN 4005 1597 E5x70 Generic EN Gopal 7.5 MSN 4005 1597 Cover.indd 1 Instruction Manual 21.07.
