Operation Manual

10 of 82
2.8. Connection
When connecting your appliance it is important to observe the fol-
lowing instructions:
2.8.1. Power supply through Car Adapter
• The car adapter should only be connected to the lighter socket
of a car (car battery = DC 12V
, truck battery = DC 24V ). If
you are in any doubt about the power source in your car, please
contact your car manufacturer.
2.9. Cabling
• Arrange cables so that they do not cause unnecessary obstruction
or risk entanglement or snaring. E.g. ensure that the cables cannot
be trod on, or tripped over.
• Do not put any objects on the cable, because it could be damaged
if you do so.
• Do not use any force and pay attention to the correct orientation of
the plug when connecting the cables and plugs.
• Do not permit any great forces to be exerted on the plug
connections, from the side, for example. This will lead to damage in
and to your device if you do so.
• Avoid short circuiting and broken cable by not crushing or
bending it sharply.
2.10. Battery Operation
Your appliance is powered by an integrated battery. In order to pro-
long the life and efficiency of your battery and ensure safe operation,
follow the instructions below:
• Batteries cannot withstand excessive heat. Take care to avoid
overheating of appliance and the integrated battery. Failure to
comply with this instruction may lead to damage to or, even
explosion of the battery.
• Only use the car adapter to charge the battery.
• The batteries are special category waste. When disposing of the
appliance ensure that this is done correctly. Contact Customer
Service for more details.
E5x70 Generic EN Gopal 7.5 MSN 4005 1597 Content.indd 10E5x70 Generic EN Gopal 7.5 MSN 4005 1597 Content.indd 10 21.07.2014 10:48:3621.07.2014 10:48:36