Operation Manual

67 of 82
 Insert the CD/DVD and wait until the program starts automatic.
PLEASE NOTE!
If it does not function, the Auto Run function is probably deactivated.
The Setup program on the CD/DVD must be started, to start installation
manually den.
 Choose the language, click then Install ActiveSync® and follow the instructions
on the screen.
PLEASE NOTE!
When installing the GoPal Assistant, ActiveSync® will be installed
automaticalllliert.
22.2. Connecting with the PC
 Press the On/Off button to start your navigation system.
 Connect the USB cable to your navigation system.
 Push the USB connector into a free USB port on your computer.
 The following screen will appear after the navigation system has been
connected:
Mass storage
mode
ActiveSync®
mode
PLEASE NOTE!
The mass storage mode will be loaded automatically after a few
seconds, if no mode has been selected.
 Select the desired mode:
E5x70 Generic EN Gopal 7.5 MSN 4005 1597 Content.indd 67E5x70 Generic EN Gopal 7.5 MSN 4005 1597 Content.indd 67 21.07.2014 10:49:3421.07.2014 10:49:34