2,7 cm / 5“ Navigationssystem MEDION® GoPal® E5x70 MSN 4004 8211 E5x70 Generic DE Gopal 7.5 RC1 Cover.indd 1 Bedienungsanleitung 28.10.
Inhaltsverzeichnis 1. 2. 3. 4. 5. 6. 7. 8. Zu dieser Anleitung ..................................................................................... 5 1.1. In dieser Anleitung verwendete Warnsymbole und Signalwörter ....... 5 1.2. Bestimmungsgemäßer Gebrauch .................................................................... 6 1.3. Konformitätsinformation ..................................................................................... 6 Sicherheitshinweise........................................
9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. Navigieren .................................................................................................. 29 9.1. Sicherheitshinweise Navigation ......................................................................29 9.2. Antennenausrichtung .........................................................................................31 9.3. Autohalterung montieren .................................................................................32 9.4.
21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 20.2. Beschreibung der Schaltflächen .....................................................................64 20.3. Übersicht des Spielfelds .....................................................................................65 Verkehrsregeln Europa ............................................................................. 66 Sonderfunktion CleanUp (englische Programmführung)...................... 67 Synchronisation mit dem PC ......................
Persönliches Notieren Sie zu Ihrem Eigentumsnachweis: Seriennummer (S/N) Passwort Hinweistext SuperPIN UUID Kaufdatum Kaufort ......................................................................... ......................................................................... ......................................................................... ......................................................................... ......................................................................... ...............
1. Zu dieser Anleitung Lesen Sie vor Inbetriebnahme die Sicherheitshinweise aufmerksam durch. Beachten Sie die Warnungen auf dem Gerät und in der Bedienungsanleitung. Bewahren Sie die Bedienungsanleitung immer in Reichweite auf. Wenn Sie das Gerät verkaufen oder weitergeben, händigen Sie unbedingt auch diese Anleitung aus. 1.1.
1.2. Bestimmungsgemäßer Gebrauch Dieses Gerät ist bestimmt für den Empfang von GPS-Signalen (durch Satelliten bereitgestellte Positionsdaten) zur Navigation und Standortermittlung. Das Gerät ist nur für den privaten und nicht für den industriellen/kommerziellen Gebrauch bestimmt. Bitte beachten Sie, dass im Falle des nicht bestimmungsgemäßen Gebrauchs die Haftung erlischt: • Bauen Sie das Gerät nicht ohne unsere Zustimmung um und verwenden Sie keine nicht von uns genehmigten oder gelieferten Zusatzgeräte.
2. Sicherheitshinweise 2.1. Gefahren für Kinder und Personen mit eingeschränkter Fähigkeit, Geräte zu bedienen • Dieses Gerät ist nicht dafür bestimmt, durch Personen (einschließlich Kinder) mit eingeschränkten physischen, sensorischen oder geistigen Fähigkeiten oder mangels Erfahrung und/oder mangels Wissen benutzt zu werden, es sei denn, sie werden durch eine für Ihre Sicherheit zuständige Person beaufsichtigt oder erhielten von Ihnen Anweisungen, wie das Gerät zu benutzen ist.
• Es besteht Verletzungsgefahr, wenn das Display bricht. Sollte dies passieren, packen Sie mit Schutzhandschuhen die geborstenen Teile ein und senden Sie diese zur fachgerechten Entsorgung an Ihr Service Center. Waschen Sie anschließend Ihre Hände mit Seife, da nicht auszuschließen ist, dass Chemikalien ausgetreten sein könnten. • Beenden Sie die Stromversorgung, schalten Sie das Gerät sofort aus bzw.
2.5. Bedingungen der Betriebsumgebung Das Nichtbeachten dieser Hinweise kann zu Störungen oder zur Beschädigung des Gerätes führen. Die Gewährleistung in diesen Fällen ist ausgeschlossen. • Halten Sie Ihr Navigationssystem und alle angeschlossenen Geräte von Feuchtigkeit fern und vermeiden Sie Staub, Hitze und direkte Sonneneinstrahlung, besonders im Auto. • Schützen Sie Ihr Gerät unbedingt vor Nässe z.B. durch Regen und Hagel.
2.7. Elektromagnetische Verträglichkeit • Beim Anschluss von zusätzlichen oder anderer Komponenten müssen die Richtlinien für elektromagnetische Verträglichkeit (EMV) eingehalten werden. Bitte beachten Sie außerdem, dass in Verbindung mit diesem Gerät nur abgeschirmte Kabel für die externen Schnittstellen eingesetzt werden dürfen. • Wahren Sie mindestens einen Meter Abstand von hochfrequenten und magnetischen Störquellen (Fernsehgerät, Lautsprecherboxen, Mobiltelefon usw.
2.8. Anschließen Beachten Sie nachfolgende Hinweise, um Ihr Gerät ordnungsgemäß anzuschließen: 2.8.1. Stromversorgung über Autoadapter • Betreiben Sie den Autoadapter nur im Zigarettenanzünder eines oder LKW-Batterie = DC Fahrzeugs (Autobatterie = DC 12V 24V ). Wenn Sie sich der Stromversorgung an Ihrem Fahrzeug nicht sicher sind, fragen Sie den Autohersteller. 2.9. Verkabelung • Verlegen Sie die Kabel so, dass niemand darauf treten oder darüber stolpern kann.
2.10. Akkubetrieb Ihr Gerät wird mit einem eingebauten Akku betrieben. Um die Lebensdauer und Leistungsfähigkeit Ihres Akkus zu verlängern sowie einen sicheren Betrieb zu gewährleisten, sollten Sie nachfolgende Hinweise beachten: • Akkus vertragen keine Hitze. Vermeiden Sie, dass sich das Gerät und so auch der eingebaute Akku zu stark erhitzen. Die Missachtung dieser Hinweise kann zur Beschädigung und unter Umständen gar zur Explosion des Akkus führen.
2.12. Pflege des Displays • Vermeiden Sie ein Verkratzen der Bildschirmoberfläche, da diese leicht beschädigt werden kann. Wir empfehlen die Verwendung von Display-Schutzfolien, um Kratzern und Verschmutzungen vorzubeugen. Sie erhalten dieses Zubehör im Fachhandel. Die bei der Auslieferung auf dem Display u. U. angebrachte Folie ist ein reiner Transportschutz! • Achten Sie darauf, dass keine Wassertröpfchen auf dem Bildschirm zurückbleiben. Wasser kann dauerhafte Verfärbungen verursachen.
4. Ansichten 4.1. Ansicht von vorne 1 2 3 Nr. 1 Komponente Ladezustandsanzeige Beschreibung Während des Ladevorgangs leuchtet die Ladezustandsanzeige orange. Sie leuchtet grün, wenn der Akku voll aufgeladen ist. Zeigt die Datenausgabe des Gerätes an. Tippen Sie mit dem Eingabestift auf den Bildschirm, um Menübefehle auszuwählen oder Daten einzugeben. 2 Touch Screen 3 Mikrofon ACHTUNG! Berühren Sie nicht das Display mit kantigen oder spitzen Gegenständen, um Beschädigungen zu vermeiden.
4.2. Rückansicht 4 Nr. Komponente Beschreibung 4 Lautsprecher Gibt Sprachanweisungen und Warnungen wieder. 4.3. Ansicht von oben 5 Nr. 5 Komponente Ein-/Ausschalter Beschreibung Schaltet das Gerät durch langes Drücken ein oder aus. Durch kurzes Drücken wechseln Sie in den Standby-Modus bzw. wecken das Gerät wieder auf. 15 von 89 E5x70 Generic DE Gopal 7.5 RC1 Content.indd 15 29.10.
4.4. Linke Seite 6 Nr. 6 7 Komponente Speicherkartensteckplatz mit Abdeckung microUSBAnschluss 7 Beschreibung Schacht zur Aufnahme einer optionalen Speicherkarte. Anschluss zur externen Stromversorgung und Anschluss für die Verbindung mit einem PC über das USB-Kabel (zum Datenabgleich) HINWEIS! Schließen Sie nach jeder Aktion mit der Speicherkarte die Abdeckung wieder. 16 von 89 E5x70 Generic DE Gopal 7.5 RC1 Content.indd 16 29.10.
5. Ersteinrichtung Nachfolgend werden wir Sie Schritt für Schritt durch die Ersteinrichtung des Navigationssystems führen. Entfernen Sie ggf. zunächst die Transportschutzfolie vom Display. 5.1. Akku laden Sie haben folgende Möglichkeiten, den Akku Ihres Navigationssystems aufzuladen: • über den mitgelieferten Autoadapter oder • über das mitgelieferte USB-Kabel.
5.2. Stromversorgung 5.2.1. Stromversorgung über Autoadapter Stecken Sie den Stecker des Verbindungskabels in den dafür vorgesehenen Anschluss Ihres Gerätes. Stecken Sie jetzt den Stromversorgungsstecker in den Zigarettenanzünder und sorgen Sie dafür, dass dieser während der Fahrt nicht den Kontakt verliert. Dies kann sonst zu Fehlfunktionen führen. 5.2.2.
Im Anschluss stehen Ihnen folgende Optionen zur Verfügung: • Über die Schaltfläche erhalten Sie eine kurze Einweisung zur Inbetriebnahme Ihres Navigationsgeräts und der -software. Hier ist unter anderem die Montage im Fahrzeug, die Navigation in der Software, die Eingabe und Verwaltung von Navigationszielen, allgemeine Benutzungshinweise usw. beschrieben. • starten Sie den Einstellungsassistenten Über die Schaltfläche zur Konfiguration der Grundeinstellungen Ihrer Navigationssoftware.
5.3.1. Hauptansichten Hier finden Sie eine Übersicht über die verschiedenen Funktionen des Hauptmenüs. Schaltfläche Beschreibung Bildschirm Kartenansicht Zieleingabe Extras Einstellungen 20 von 89 E5x70 Generic DE Gopal 7.5 RC1 Content.indd 20 29.10.
HINWEIS! Werden von der Navigationssoftware keine Kartendateien im Gerät oder auf der Speicherkarte gefunden, können Sie das Navigationsmenü bzw. die Einstellungen nicht anwählen. Es erscheint dann automatisch das Menü Extras. Solange Ihr Navigationssystem sich an einer externen Stromversorgung befindet oder im Akkubetrieb läuft, genügt ein kurzer Druck auf den Ein- / Ausschalter, um das Gerät ein- bzw. auszuschalten (Standby Modus).
6. Allgemeine Bedienungshinweise 6.1. Ein- und Ausschalten Nach der Ersteinrichtung befindet sich Ihr Gerät in seinen normalen Betriebszustand. Drücken Sie 0,5 Sekunden lang den Ein- / Ausschalter, um Ihr Navigationssystem einzuschalten. HINWEIS! Ihr Gerät wird so ausgeliefert, dass es sich im eingeschalteten Zustand auch bei Nichtbenutzung nicht von alleine ausschaltet. Über den Button Einstellungen auf dem Hauptbildschirm Ihres Gerätes können Sie die Betriebszeit Ihren Bedürfnissen anpassen.
Wenn Sie keine dieser drei Möglichkeiten auswählen wollen, geht das Gerät nach einigen Sekunden automatisch in den Standby-Modus. Für weitere Einstellungen zum Standby Modus siehe auch Kapitel Sonderfunktion CleanUP, Punkt 8. Haben Sie die Komfortfunktion DC AutoSuspend aktiviert, erscheint nach Ablauf der Verzögerungszeit von einigen Sekunden ebenfalls dieser Bildschirm. 7. Security Über diese Funktion haben Sie die Möglichkeit Ihr Gerät vor fremden Zugriff zu schützen.
Nachdem Sie Ihr Passwort eingeben haben, bestätigen Sie dieses mit . Geben Sie das Passwort zur Bestätigung erneut ein, um eventuelle Flüchtigkeitsfehler zu vermeiden. HINWEIS! Das Passwort wird in Form von Sternchen (****) angezeigt. Nachdem Sie das Passwort eingeben haben, erscheint ein weiteres Textfeld. Geben Sie hier einen Hinweistext ein, der als Gedächtnisstütze für Ihr Passwort dient. Diesen Hinweis können Sie dann aufrufen, wenn Sie das Passwort vergessen bzw. verlegt haben. 7.2.
7.3. SuperPIN und UUID Nachdem Sie die Einstellungen vorgenommen haben, erscheint auf dem Bildschirm die SuperPIN und die UUID (Universally Unique IDentifier = eindeutige Geräteidentifikation). HINWEIS! Notieren Sie diese Daten in Ihre Bedienungsanleitung und bewahren diese an einem sicheren Ort auf. Diese Angaben benötigen Sie, wenn Sie das Passwort 3 Mal falsch eingegeben haben. Das Navigationsgerät kann dann nur mit diesen Angaben freigeschaltet werden. 25 von 89 E5x70 Generic DE Gopal 7.5 RC1 Content.
7.4. Nachträgliche Einstellungen vornehmen Wenn Sie bereits ein Passwort eingeben und nachträglich Einstellung vornehmen bzw. das Passwort ändern möchten, starten Sie die Security Funktion. Geben Sie Ihr aktuelles Passwort ein. Es erscheint folgender Bildschirm: Taste Beschreibung Passwort oder Hinweistext ändern Authentifizierungs-Einstellungen (s. Seite 24, Einstellungen vornehmen) SuperPIN und UUID anzeigen (s. Seite 25) Setzt die komplette Security-Funktion zurück.
7.5. Passwortabfrage Wenn Sie ein Passwort über die Security Funktion festgelegt haben, erscheint, je nach Einstellung, beim Neustart des Gerätes eine Passwortabfrage. Geben Sie über das Tastenfeld das von Ihnen angelegte Passwort ein. HINWEIS! Das Passwort wird in Form von Sternchen (****) angezeigt. Der von Ihnen hinterlegte Hinweistext wird bei Antippen des Fragezeichens angezeigt. Tippen Sie zum Bestätigen der Eingabe auf .
8. Navigationssystem zurücksetzen Sie haben die Möglichkeit, Ihr Navigationssystem zurückzusetzen, falls es nicht mehr ordnungsgemäß reagiert oder arbeitet. Diese Möglichkeit startet das Navigationssystem neu, ohne dass eine Neuinstallation erforderlich ist. Der Reset wird oft verwendet, um den Speicher zu reorganisieren. Dabei werden alle laufenden Programme abgebrochen und der Arbeitspeicher wird neu initialisiert. Sie haben zwei Möglichkeiten, Ihr Gerät zurückzusetzen. 8.1.
8.2. Vollständiges Abschalten/Hard Reset ACHTUNG! Ein Hard Reset löscht alle Daten im flüchtigen Speicher. Ihr Navigationssystem befindet sich im Normalfall im Standby-Modus, wenn Sie es durch kurzes Drücken des Ein-/Ausschalters ausgeschaltet haben. Darüber hinaus kann das System auch vollständig ausgeschaltet werden, wodurch die Energieaufnahme so niedrig wie möglich gehalten wird. Bei diesem vollständigen Ausschalten gehen alle Daten des flüchtigen Speichers verloren (Hard Reset).
HINWEIS! In einigen Ländern ist die Verwendung von Geräten, die vor Verkehrsüberwachungsanlagen (z. B. „Blitzer“) warnen, untersagt. Bitte informieren Sie sich über die rechtliche Situation und verwenden Sie die Warnfunktion nur dort, wo es zugelassen ist. Wir haften nicht für Schäden, die aus der Nutzung der Warnfunktion entstehen. ACHTUNG! Die Straßenführung und die Straßenverkehrsordnung haben Vorrang vor den Anweisungen des Navigationssystems.
9.1.1. Hinweise für die Benutzung im Fahrzeug • Achten Sie bei der Installation der Halterung darauf, dass die Halterung auch bei einem Unfall kein Sicherheitsrisiko darstellt. • Befestigen Sie die Komponenten fest in Ihrem Fahrzeug und achten Sie bei der Installation auf freie Sichtverhältnisse. • Der Bildschirm des Gerätes kann Lichtreflektionen hervorrufen. Achten Sie daher darauf, dass Sie während des Betriebes nicht geblendet werden.
9.3. Autohalterung montieren ACHTUNG! Befestigen Sie die Halterung für das Gerät so an der Windschutzscheibe, dass dadurch die Sicht nicht behindert wird. Benutzen Sie die Autohalterung ausschließlich mit eingesetztem Navigationsgerät, um Gefährdungen zu vermeiden. Schnapphebel (Abbildung ähnlich) HINWEIS! Je nach Ausführung kann Ihr Navigationssystem alternativ auch mit einer anderen ähnlichen Autohalterung ausgestattet sein. Reinigen Sie die Scheibe gründlich mit einem Glasreiniger.
9.4. Navigationssystem befestigen Verbinden Sie den Autoadapter und ggf. die TMC-Wurfantenne mit Ihrem Navigationssystem und stecken Sie ggf. eine Speicherkarte ein. Setzen Sie das Gerät mittig unten auf die Halteschale. Drücken Sie das Gerät leicht nach hinten bis es hörbar einrastet. 1 2 (Abbildung ähnlich) Jetzt können Sie die komplette Einheit an der gereinigten Windschutzscheibe aufsetzen. 33 von 89 E5x70 Generic DE Gopal 7.5 RC1 Content.indd 33 29.10.
9.5. Autoadapter anschließen Stecken Sie den Stecker des Verbindungskabels in den dafür vorgesehenen Anschluss hres Gerätes. 2 1 Stecken Sie jetzt den Stromversorgungsstecker in den Zigarettenanzünder und sorgen Sie dafür, dass dieser während der Fahrt nicht den Kontakt verliert. Dies kann sonst zu Fehlfunktionen führen. HINWEIS! Ziehen Sie nach der Fahrt oder wenn Sie das Fahrzeug längere Zeit abstellen den Stromversorgungsstecker aus dem Zigarettenanzünder.
9.6. Navigationssoftware starten HINWEIS! Enthält Ihre Speicherkarte (zusätzliches) Kartenmaterial muss diese während der Benutzung des Navigationssystems immer im Gerät eingelegt sein. Wird die Speicherkarte während der Benutzung auch nur kurzzeitig entfernt, muss zum Neustart des Navigationssystems ein Reset durchgeführt werden . Je nach Navigationssystem geschieht dieser Reset automatisch. Schalten Sie Ihr Navigationssystem ein. Je nach Ausführung startet die Navigationssoftware sofort bzw.
10. Erste Hilfe (optional) Je nach Softwareausstattung ist Ihr Navigationssystem mit der Anwendung Erste Hilfe ausgestattet. Starten Sie diese Anwendung aus dem Menü Extras heraus durch Tippen auf die Schaltfläche Erste Hilfe. Mit dieser Anwendung erhalten Sie wichtige Informationen wie z. B. • Informationen zur Sicherheit am Unfallort, • Sofortmaßnahmen im Straßenverkehr, • Erste Hilfe-Tipps für den Notfall (Verkehrsunfall, lebensrettende Maßnahmen) sowie • Notruftelefonnummern 10.1.
11. Informationen zur Verkehrsüberwachung (optional) Bei installierter Warnfunktion vor Verkehrsüberwachungspunkten erscheint der folgende Bildschirm: Bestätigen Sie mit , wenn Sie die Navigation mit der Warnfunktion vor Verkehrsüber-wachungspunkten nutzen wollen. Um die Warnfunktion zu konfigurieren, tippen Sie im Menü Einstellungen auf die Schaltfläche Sonderfunktionen konfigurieren. 37 von 89 E5x70 Generic DE Gopal 7.5 RC1 Content.indd 37 29.10.
Tippen Sie im folgenden Bildschirm auf POI-Warner: Tippen Sie hier auf Stationäre Blitzer, um die Einstellung für die „stationären Blitzer” vorzunehmen: Hier haben Sie die Möglichkeit, die Verkehrsüberwachungspunkte in einer Karte darstellen zu lassen oder diese auszublenden. Hier können Sie auch einstellen, ob Sie durch akustische Signale vor Erreichen eines Verkehrsüberwachungspunktes benachrichtigt werden möchten. 38 von 89 E5x70 Generic DE Gopal 7.5 RC1 Content.indd 38 29.10.
Der akustische Hinweis auf einen Verkehrsüberwachungspunkt erfolgt durch einen Warnton ca. 15 Sekunden vor Erreichen des Überwachungspunktes. Ein doppelter Warnton erfolgt dann noch einmal ca. 7 Sekunden vorher. Ein vierfacher Warnton weist auf eine zu hohe Geschwindigkeit hin. Zusätzlich wird durch einen Annäherungsbalken der Abstand zum Überwachungspunkt dargestellt.
12. Bluetooth (optional) Die Bluetooth-Technologie dient dazu, kurze Entfernungen drahtlos zu überbrücken. Bluetooth-Geräte übertragen Daten per Funk, so dass andere Geräte die ebenfalls diese Technologie unterstützen ohne Kabel miteinander kommunizieren können. Bevor Sie Ihr Navigationssystem als Freisprecheinrichtung mit Ihrem Bluetooth Mobiltelefon nutzen können, müssen die beiden Geräte aufeinander abgestimmt werden (Koppelung).
Taste Name Beschreibung Zeigt den Verlauf der getätigten und der empfangenen Anrufprotokoll Anrufe an. Hierüber sehen Sie das Postfach Ihres Mobiltelefons Nachrichten ein. Rufen Sie hierüber die auf dem Mobiltelefon gespeiKontakte cherten Kontakte auf. Zurück Vorherige Seite des Hauptbildschirms Löschen Löschen Sie mit diesem Feld die über das Tastenfeld eingegeben Nummer. Anrufen Wählen Sie mit diesem Feld die über das Tastenfeld eingegeben Nummer.
12.3. Navigationsgerät und Mobiltelefon koppeln HINWEIS! Bei der Verbindung mit der Freisprecheinrichtung erfolgt die Suche nach einem Gerät grundsätzlich durch Ihr Navigationsgerät. Je nach Typ des Mobiltelefons kann der Funktionsumfang der Freisprecheinrichtung eingeschränkt sein. Aktivieren Sie die Bluetooth-Funktion auf Ihrem Mobiltelefon. HINWEIS! Jedes Mobiltelefon benutzt dazu unterschiedliche Wege. Lesen Sie daher unbedingt die Anleitung Ihres Mobiltelefons.
Ihr Mobiltelefon erkennt das Navigationsgerät. Sie werden aufgefordert einen 4-stelligen PIN-Code einzugeben. Dieser lautet für Ihr Navigationsgerät 1 2 3 4. Anschließend muss die Verbindung durch eine oder mehrere Bestätigungsmeldungen auf Ihrem Mobiltelefon akzeptiert werden. Danach steht Ihnen die Freisprecheinrichtung über das Navigationssystem zur Verfügung.
12.4. Anrufe tätigen Tippen Sie im Bluetooth-Hauptbildschirm über das Tastenfeld die Nummer ein, die Sie anrufen möchten. Klicken Sie auf das Feld , um den Anruf zu tätigen. 12.5. Eingehende Nachrichten lesen oder vorlesen lassen Sofern Ihr Mobiltelefon die Funktion unterstützt, können Sie eingehende Nachrichten lesen, oder zusätzlich auch vorlesen lassen. Aktivieren Sie hierzu die Option Anzeigen und vorlesen unter Einstellungen, Nachrichten.
12.6. Während eines Anrufes Taste Beschreibung Anruf beenden Stummschaltung für Mikrofon und Lautstärkeeinstellungen Gespräch an das Mobiltelefon zurückgeben 13. Sprachkommandos (optional) Während der Navigation kann über längeres Drücken auf den Touchscreen der Spracheingabemodus aktiviert werden. Ein kurzer Hinweiston weist darauf hin, dass das Navigationssystem für die Spracheingabe bereit ist.
Gültigkeitsbereich Immer gültig Allgemein Globale Kommandos Kommando abbrechen | Abbruch zurück Hilfe Bitte geben Sie die gewünschte Adresse in der Reihenfolge Ort, Straße und Hausnummer ein. Sie können auch nur einen Ort oder einen Ort mit Straße eingeben.
Gültigkeitsbereich Aktuelle Route / Routeninformation / Übersichtskarte Kommando Wegbeschreibung | Routenbeschreibung Routen | Routenoptionen | Routeneinstellungen | Routen Verkehrslage | Verkehrsinformation | Stauinfo | Staulage | Verkehrslage aktuelle Position | Standort Lautstärkeeinstellungen (Lautstärke Klicktöne | (Tastenklick| Klick) [Lautstärke]) (verringern | runter | leiser) (Lautstärke Klicktöne | (Tastenklick|Klick) [Lautstärke]) (erhöhen | lauter | hoch) (Lautstärke Mp3-Player | (M P 3 | Mu
Gültigkeitsbereich Karte Kommando [zeige] (Pfeilansicht | Manöveransicht | Pfeil) [zeige] (Kompassansicht | Kompass | GPS Ansicht) keine Karte | Karte (aus | ausschalten | ausblenden) [zeige] [nur | normale] (Karte | Kartenansicht) [zeige] (3 D | dreidimensionale) [Karte | Ansicht | Kartenansicht | Darstellung] [zeige] (2 D | zweidimensionale) [Karte | Kartenansicht | Ansicht | Darstellung] [zeige] [ Ansicht | Karte| Ausrichtung] in Fahrtrichtung Karte optimiert | optimiere Karte | Kartenrichtung optimiert
14. MP3-Player (optional) Ihr Navigationssystem ist mit einem MP3- Player ausgestattet. Starten Sie den MP3-Player aus dem Menü Extras heraus durch Tippen auf die Schaltfläche MP3-Player. Alle auf der Speicherkarte befindlichen MP3-Dateien können in eine Favoritenliste übernommen werden und stehen zur Wiedergabe bereit. (Die Speicherkarte darf dabei nicht schreibgeschützt sein.) 14.1.
14.2. Titel auswählen und in die Favoritenliste aufnehmen Um Titel auszuwählen, tippen Sie auf Favoritenliste aufnehmen möchten. und wählen die Titel aus, die Sie in die Hier haben Sie drei Möglichkeiten, die Titel zu markieren: Tippen Sie auf , um alle Titel inkl. aller Unterordner zu markieren. Tippen Sie auf , um alle Titel in der aktuellen Ansicht zu markieren. Tippen Sie auf , um alle Markierungen innerhalb eines Ordners aufzuheben.
14.3. Favoritenliste Durch Tippen auf das gelangen Sie in die Favoritenliste: Alle Titel löschen Sie mit . . Einzelne Titel löschen Sie mit Bestätigung mit zur Übernahme der neuen Auswahl in Favoritenliste. 14.4. Liste der festgelegten Lesezeichen Durch Tippen auf das gelangen Sie in die Liste der festgelegten Lesezeichen: Alle Lesezeichen löschen Sie . Einzelnes Lesezeichen löschen Sie mit . Bestätigung mit zur Übernahme der neuen Auswahl in der Liste der Lesezeichen.
15. Picture Viewer (optional) Ihr Navigationssystem ist mit einem Picture Viewer ausgestattet. Mit dem Picture Viewer können Sie Bilder im jpg-Format, die sich auf Ihrer Speicherkarte befinden, auf Ihrem Navigationssystem ansehen. Sämtliche Bilder, die sich auf der Speicherkarte befinden, sind sofort verfügbar. 15.1. Bedienung des Picture Viewers Starten Sie den Picture Viewer aus dem Menü Extras heraus durch Tippen auf die Schaltflächen Picture Viewer. 15.2.
15.2.1. Vollbildansicht Tippen Sie in der Vollbildansicht in den unteren Bildschirmbereich, um die Service-Leiste zu aktivieren: Taste Beschreibung Drehen um je 90° im Uhrzeigersinn Rasterfelder einblenden Vorheriges Bild Dia-Show starten Dia-Show unterbrechen Nächstes Bild Drehen um je 90° gegen den Uhrzeigersinn 53 von 89 E5x70 Generic DE Gopal 7.5 RC1 Content.indd 53 29.10.
Durch Tippen in die Mitte des Bildes, kehren Sie in die Miniatur-Ansicht zurück. Durch Tippen auf das Symbol (Rasterfelder einblenden), wird das gezeigte Bild in 6 Felder unterteilt. Durch Tippen auf ein Viereck wird dieser Bereich des Bildes vergrößert dargestellt: Durch Tippen in die Mitte des Bildes gelangen Sie in den Vollbildmodus zurück. 54 von 89 E5x70 Generic DE Gopal 7.5 RC1 Content.indd 54 29.10.
16. Travel Guide (optional) Ihr Navigationssystem ist mit einem Travel Guide ausgestattet. Der Travel Guide liefert allgemeine Informationen zu verschiedenen Bereichen einzelner Städte oder Regionen in Europa, wie z.B. Sehenswürdigkeiten, Restaurants, Kultur und Reiseinfos. Starten Sie den Travel Guide aus dem Menü Extras heraus durch Tippen auf die Schaltfläche Travel Guide. 16.1.
Abb. 5 Abb. 6 Abb. 7 Abb. 8 Wenn Sie zu dem angezeigten Ziel navigieren wollen, bestätigen Sie mit Die Adresse steht dann der Navigationssoftware als Ziel zur Verfügung. Taste . Beschreibung Vorheriges Bild Zeigt die Anschrift der ausgewählten Kategorie Zeigt verfügbare Fotos der ausgewählten Kategorie Tippen Sie auf diese Schaltfläche, um direkt zu der ausgewählten Adresse zu navigieren. HINWEIS! Die Auswahlmöglichkeiten innerhalb des Travel Guides können je nach Softwareausstattung variieren.
17. Wo bin ich? (optional) Über die Funktion Wo bin ich? Erhalten Sie Informationen über Ihren aktuellen Standort, sofern ein GPS-Signal verfügbar ist. Tippen Sie im Menü Extras auf die Schaltfläche Wo bin ich? Um den aktuellen Ort zu Ihren Favoriten hinzufügen, tippen Sie auf Aktuelle Position speichern. 57 von 89 E5x70 Generic DE Gopal 7.5 RC1 Content.indd 57 29.10.
18. Eco Expert (optional) Diese Funktion liefert Ihnen über ein Punktesystem Informationen zur Umweltverträglichkeit Ihres Fahrstils und enthält Tipps für ein ökologisches Fahrverhalten (Öko-Tipps). 18.1. Übersicht des Hauptbildschirms Klicken Sie im Menü Extras auf die Schaltfläche Eco Expert. Eine aktuelle Übersicht erhalten Sie unter Öko-Punkte heute.
Sie können die Punkte jederzeit zurücksetzen, indem Sie auf die Schaltfläche Punkte zurücksetzen tippen. Unter Öko-Punkte letzte 30 Tage können Sie sich die Statisktik der letzten 30 Tage anzeigen lassen. Tippen Sie im Hauptbildschirm auf Einstellungen, um verschiedene Anpassungen vorzunehmen: 59 von 89 E5x70 Generic DE Gopal 7.5 RC1 Content.indd 59 29.10.
19. Alarm Clock (Weckfunktion) (optional) Ihr Navigationssystem ist mit einer Alarm Clock / Weckfunktion ausgestattet. Starten Sie diese Funktion aus dem Menü Extras heraus durch Antippen der Schaltfläche Alarm Clock. Die Weckfunktion kann sowohl als normaler Wecker bei ausgeschaltetem Gerät (Standby Modus / Stromsparmodus) wie auch als Erinnerung während der laufenden Navigation erfolgen. Diese Ansicht erscheint, wenn Sie noch keine Weckzeit eingerichtet haben.
19.2. Einstellen der Systemzeit In der oberen rechten Bildschirmecke befindet sich die Anzeige der aktuellen Uhrzeit. Diese können Sie wie folgt anpassen: Tippen Sie im Hauptbildschirm auf schirm: Tippen Sie auf . Es erscheint folgender Bild- , um hier die Zeiteinstellung vorzunehmen: HINWEIS! Die Systemzeit wird bei GPS-Empfang aktualisiert. Beachten Sie dabei auch die korrekte Zeitzoneneinstellung. 19.3. Auswahl eines Wecktons Um einen Weckton auszuwählen tippen Sie auf .
Wenn Sie einen Weckton von Ihrer Speicherkarte auswählen möchten, tippen Sie auf den entsprechenden Ordner in dem Verzeichnis Storage Card und bestätigen Sie erneut mit . Tippen Sie nun auf den gewünschten Weckton und bestätigen Sie mit Die Auswahl wird durch ein Verlassen Sie das Menü mit . gekennzeichnet. . 19.4. Lautstärke einstellen Durch Antippen der Schaltfläche passen.
19.5. Snooze-Funktion Wenn der Wecker zur eingestellten Alarmzeit ertönt haben Sie die Möglichkeit, das Wecksignal über die Snooze-Funktion in regelmäßigen Abständen wiederholen zu lassen. Gehen Sie hierzu wie folgt vor: Tippen Sie dazu bei Anzeige des Wecksymbols auf , um die Snooze-Funktion zu aktivieren. Um am Folgetag zur eingegebenen Uhrzeit wieder geweckt zu werden, beenden Sie die Snooze-Funktion. Bei Klick auf verlassen Sie die Weckanzeige und kehren zur Ansicht vor dem Weckzeitpunkt zurück.
20. Sudoku (optional) Ihr Navigationssystem ist mit dem Spiel Sudoku ausgestattet. Starten Sie das Spiel aus dem Menü Extras heraus durch Tippen auf die Schaltfläche Sudoku. Sudoku ist ein Zahlenrätsel. Das Spielfeld ist quadratisch und in neun Blöcke unterteilt. Jeder Block besteht aus 9 Kästchen. Das Ziel beim Sudoku besteht darin, alle 81 Zahlenfelder korrekt mit den Zahlen 1 - 9 zu füllen. Dabei darf jede Zahl pro Block nur ein Mal vorkommen.
Einstellungen Im Menü Einstellungen haben Sie folgende Möglichkeiten: Durch Tippen auf diese Schaltfläche wird das laufende Spiel abgespeichert. Durch Tippen auf diese Schaltfläche laden Sie ein begonnenes Spiel auf den Bildschirm. Löschen eines gespeicherten Spielstandes Hier können Sie den Schwierigkeitsgrad einstellen. zurück zum aktuellen Spiel 20.3. Übersicht des Spielfelds 65 von 89 E5x70 Generic DE Gopal 7.5 RC1 Content.indd 65 29.10.
20.3.1. Beschreibung der Schaltflächen Taste Beschreibung Zahleneingabeleiste Leiste zur Auswahl der einzugebenden Zahl in die Zahlenfelder. Die ausgewählte Zahl wird hervorgehoben und kann jetzt durch Tippen auf ein Zahlenfeld eingegeben werden. Eingabe Tippen Sie in der Zahleneingabeleiste erst auf die Zahl, die in einem bestimmten Zahlenfeld erscheinen soll und danach auf das entsprechende Zahlenfeld. Löschmodus Tippen Sie auf das Löschsymbol und anschließend auf die zu löschende Zahl.
22. Sonderfunktion CleanUp (englische Programmführung) Die CleanUp-Funktion dient der gezielten Löschung von Daten ohne Benutzung eines PCs. HINWEIS! Bitte nutzen Sie diese Funktion sehr vorsichtig, da Daten gelöscht werden können, die dann erst manuell wieder aufgespielt werden müssen. Die CleanUp-Funktion wird aktiviert, wenn unmittelbar nach dem Startton nach einem Reset für kurze Zeit das „o“ im GoPal-Schriftzug des Startbildschirms angetippt wird. Die CleanUp-Funktion bietet verschiedene Optionen: 1.
6. Format Flash Formatiert den internen „My Flash Disk“ Speicher. Diese Formatierung könnte im Fall einer erweiterten Fehlerbehebung notwendig sein. Nach Durchführung der FormatFunktion ist eine neue Kalibrierung des Bildschirms erforderlich. Außerdem werden alle Daten aus dem internen „My Flash Disk“ Speicher unwiderruflich gelöscht (siehe Remove All). 7. GPS Factory Reset Stellt den Auslieferungszustand des GPS-Empfängers her.
9. Auto Mass Storage Hierüber steuern Sie das Verhalten des Gerätes beim Anschluss an einem USB-Port. In der Einstellung Auto Mass Storage: Off können Sie zwischen dem Massenspeicher- und dem ActiveSync®-Modus wählen. Im Auto Mass Storage: On geht Ihr Gerät automatisch in den Massenspeichermodus. Exit Verlassen der CleanUp-Funktion und Geräteneustart (wie Reset). HINWEIS! Vor dem eigentlichen Löschvorgang der Daten muss dieser erst bestätigt werden. Tippen Sie hierzu auf YES.
23. Synchronisation mit dem PC 23.1. Microsoft® ActiveSync® installieren Zur Übertragung von Daten zwischen Ihrem PC und Ihrem Navigationssystem benötigen Sie das Programm Microsoft® ActiveSync®. Eine Lizenz dieses Programms haben Sie mit diesem Gerät erworben und befindet sich auf der CD/DVD. HINWEIS! Falls Sie Nutzer des Windows Vista/Windows® 7/Windows® 8 Betriebssystems sind, benötigen Sie die ActiveSync®-Kommunikationssoftware nicht.
23.2. Mit dem PC verbinden Starten Sie Ihr Navigationssystem, indem Sie den Ein-/Ausschalter betätigen. Verbinden Sie das USB Kabel mit dem Navigationssystem. Stecken Sie das andere Ende des USB Kabels in einen freien USB-Anschluss an Ihrem Computer. Nachdem das Navigationssystem angeschlossen ist, erscheint der folgende Bildschirm: Massenspeichermodus ActiveSync®Modus HINWEIS! Sofern kein Modus ausgewählt wird, wird der Masserspeichermodus automatisch nach einigen Sekunden geladen.
HINWEIS! Wenn Sie sich in diesem Modus befinden, können auf dem Gerät keine weiteren Eingaben parallel gemacht werden. Um sich vor Datenverlust zu schützen, verwenden Sie die „Hardware sicher entfernen“ Funktion Ihres Betriebsystems. Nun entfernen Sie das Kabel aus Ihrem Navigationssystem. Der Hardwareinstallationsassistent erkennt nun ein neues Gerät und installiert einen passenden Treiber. Dies kann einige Minuten dauern. 23.2.2.
23.3. Mit Microsoft® ActiveSync® arbeiten Wenn Sie Ihr Navigationssystem mit dem PC verbinden, wird automatisch ActiveSync® gestartet. Das Programm prüft, ob es sich um das Gerät handelt, mit dem eine Partnerschaft eingegangen wurde. Ist dies der Fall, werden die seit der letzten Synchronisation stattgefunden Änderungen auf dem PC und auf dem Navigationssystem miteinander verglichen und abgestimmt.
24. GPS (Global Positioning System) Das GPS ist ein satellitengestütztes System zur Standortbestimmung. Mit Hilfe von 24 erdumkreisenden Satelliten ist eine auf wenige Meter genaue Bestimmung der Position auf der Erde möglich. Der Empfang der Satellitensignale erfolgt über die Antenne des eingebauten GPS-Empfängers, die dazu eine „freie Sicht“ zu mindestens 4 dieser Satelliten benötigt. HINWEIS! Bei eingeschränkter Sicht (z.B.
25. TMC (Traffic Message Channel) Traffic Message Channel (TMC) ist ein digitaler Radio-Datendienst, der ähnlich wie RDS funktioniert und zur Übertragung von Verkehrsstörungen an ein geeignetes Empfangsgerät verwendet wird. Die Verkehrsinformationen werden ständig über FM übertragen. Da das Signal ständig übertragen wird, ist der Benutzer weniger von den nur halbstündlich ausgestrahlten Verkehrshinweisen abhängig. Außerdem können wichtige Informationen, wie z.B. bei Geisterfahrern sofort weitergegeben werden.
26. Umgang mit Speicherkarten 26.1. Einsetzen von Speicherkarten Entnehmen Sie vorsichtig die optionale Speicherkarte aus der Verpackung (falls vorhanden). Achten Sie darauf, dass die Kontakte nicht berührt oder verschmutzt werden. Schieben Sie die Speicherkarte vorsichtig, mit der Kontaktseite voraus, in den Kartenschacht. Die Karte muss leicht einrasten. 76 von 89 E5x70 Generic DE Gopal 7.5 RC1 Content.indd 76 29.10.
26.2. Entfernen der Speicherkarte HINWEIS! Entfernen Sie die Speicherkarte nur, wenn vorher die Navigationssoftware beendet und das Gerät über die Ein-/Austaste ausgeschaltet wurde. Andernfalls können Daten verloren gehen. Um die Karte zu entfernen, drücken Sie leicht gegen die Oberkante, bis sich die Sperre löst. Ziehen Sie nun die Karte heraus, ohne die Kontakte zu berühren. Lagern Sie die Speicherkarte in der Verpackung oder an einen anderen sicheren Ort.
26.3. Weiteres Kartenmaterial Ihr Navigationssystem ist werksseitig bereits mit digitalisiertem Kartenmaterial im internen Speicher ausgestattet. Je nach Ausführung befinden sich weitere digitalisierte Karten auf Ihrer CD/DVD. Diese Karten können Sie sofort auf eine Speicherkarte übertragen. Es empfiehlt sich hierbei der Einsatz eines externen Kartenlesers. Der mitgelieferte GoPal Assistant ermöglicht eine einfache und individuelle Zusammenstellung des zu übertragenden Kartenmaterials.
26.3.2. Alternative Installation der Navigationssoftware von einer Speicherkarte Die Software für Ihr Navigationssystem kann auch direkt von einer entsprechend vorbereiteten Speicherkarte installiert werden. Ggf. muss die vorinstallierte Software vorher deinstalliert werden (s. Sonderfunktion CleanUp). Während der Ersteinrichtung werden Sie aufgefordert die Navigationssoftware zu installieren. Gehen Sie bitte wie folgt vor: Entnehmen Sie vorsichtig die Speicherkarte aus der Verpackung.
27. FAQ - Häufig gestellte Fragen Wo finde ich mehr Informationen zum Navigationssystem? Ausführliche Bedienungsanleitungen für die Navigation finden Sie auf der CD/DVD, die Ihrem Gerät beiliegt. Nutzen Sie als zusätzliche Hilfe auch die umfangreichen Hilfefunktionen, die mit einem Tastendruck (meist F1 am PC) bzw. Auswahl der Hilfeoption zur Verfügung stehen. Diese Hilfen werden Ihnen während der Nutzung des Computers oder des Gerätes bereitgestellt.
28. Kundendienst 28.1. Fehler und mögliche Ursachen Das Navigationssystem reagiert nicht mehr oder verhält sich untypisch. Führen Sie einen Reset durch. Das Navigationssystem wird von ActiveSync® nur als Gast erkannt. Siehe Informationen auf Seite 73. Der GPS-Empfänger kann nicht initialisiert oder gefunden werden.
28.2. Benötigen Sie weitere Unterstützung? Wenn die Vorschläge in den vorangegangenen Abschnitten ihr Problem nicht behoben haben, nehmen Sie bitte Kontakt mit uns auf. Entnehmen Sie die Telefonnummer von der Umschlagseite dieser Bedienungsanleitung.
• Wenn Sie die Handgepäckkontrolle am Flughafen passieren, ist es empfehlenswert, dass Sie das Gerät und alle magnetischen Speichermedien (externe Festplatten) durch die Röntgenanlage (die Vorrichtung, auf der Sie Ihre Taschen abstellen) schicken. Vermeiden Sie den Magnetdetektor (die Konstruktion, durch die Sie gehen) oder den Magnetstab (das Handgerät des Sicherheitspersonals), da dies u. U. Ihre Daten zerstören könnte. 29. Recycling und Entsorgung Das Gerät und seine Verpackung sind recyclingfähig.
30. Technische Daten Parameter Angaben Mitac CA-052-00U-00 Stromversorgung Stromversorgungskabel für Zigarettenanzünder EIngang: 12-24V DC 1300 mA Sicherung: F2AL/250V 2A (max.) Ausgang: 5V Akku Li-Ion, 3,7 V Speicherkartentyp Micro-SD Bluetooth (optional) Class 2 USB-Schnittstelle USB 2.0 Abmessungen ca. 136 mm x 14 mm x 86 mm Gewicht inkl. Akku ca.
32. Impressum Copyright © 2013 Alle Rechte vorbehalten. Diese Bedienungsanleitung ist urheberrechtlich geschützt. Vervielfältigung in mechanischer, elektronischer und jeder anderen Form ohne die schriftliche Genehmigung des Herstellers ist verboten. Das Copyright liegt bei der Firma: Medion AG Am Zehnthof 77 45307 Essen Deutschland Technische und optische Änderungen sowie Druckfehler vorbehalten.
URL LUX QR Code www.medion.com/lu/de/ 86 von 89 E5x70 Generic DE Gopal 7.5 RC1 Content.indd 86 29.10.
33. Index A ActiveSync®..................................................70 ActiveSync®-Modus ..................................72 Akkubetrieb.................................................12 Akku laden ...................................................17 Alarm Clock (Weckfunktion)..................60 Auswahl eines Wecktons....................61 Beenden ...................................................63 Einstellen der Systemzeit ...................61 Lautstärke einstellen ...........................
R Recycling und Entsorgung.....................82 Reinigung und Wartung .........................12 Reset...............................................................28 S Security Einstellungen .........................................24 Nachträgliche Einstellungen ............26 Passwortabfrage ...................................27 Passwort und Hinweistext .................23 SuperPIN und UUID .............................25 Sicherheitshinweise.....................................7 Akkubetrieb ..........
89 von 89 E5x70 Generic DE Gopal 7.5 RC1 Content.indd 89 29.10.
12,7 cm / 5“ Navigationssystem MEDION® GoPal® E5x70 MSN 4004 8211 E5x70 Generic DE Gopal 7.5 RC1 Cover.indd 1 Bedienungsanleitung 28.10.