Software Manual

Adjusting the settings
22
• Screen settings
• Power management
• Restore factory settings
Tap one of the buttons to open the corresponding sub-menu. To close the menu again, tap the
button.
Security settings
Your navigation system gives you the option of protecting your system from access using a user-
defined password. More information on the security settings can be found in the device manual.
Note
Please be aware that this setting is only available on certain types of device.
Music track title
In this sub-menu you can set whether music track titles are displayed in the map view during
playback from the MP3 player.
• If you select the option Do not display music track title (default setting) from the menu, the
MP3 player changes from one track to the next during playback, without the new track title being
shown in the map view.
• If you select the option Display music track title from the menu, the MP3 player shows the title
of the new music track for around 5 seconds at the top edge of the map view.
Screen settings
This sub-menu allows you to individually adjust the brightness settings for daytime/nighttime
operation and to calibrate the screen.
• When you tap the Setup brightness button, you can individually lower or raise the
Brightness level daytime and Brightness level nighttime to six levels using the and
buttons.
• Tapping the Calibrate display button allows you to recalibrate the touchscreen of your
navigation device. This becomes necessary when the entries on the touchscreen no longer
correspond to the actions performed: For example, the assignment of keys to appropriate
symbols or commands may deviate from the instructions.
To calibrate the device, follow the instructions on the screen by tapping the target sign. Finally,
accept the new settings by tapping the screen again.
Note
If you format the flash memory of your navigation device in order to, for example, update
to a newer version of the software, the screen must also be recalibrated during
installation (refer also to the device manual).
The brightness settings will be saved and the stored value will be used the next time
your start-up your navigation system.