Operating Instructions

Security

The device will go into the Standby mode automatically after a few seconds if you do not

want to select any of these three possibilities.

For further settings within the Standby mode also see the chapter on “Special CleanUp

Function”, page 69, point 8.

This display will also appear after the delay period of a few seconds has expired, if you

have activated the DC AutoSuspend Comfort Function.

Security

You have the possibility of protecting your device against external access by means of this

function. Some one-off settings will have to be made before you will be able to use this

function. Proceed as follows to do this:

Storing the password and the information note

1. Go to Settings and then to Device settings by means of the main display.

2. Click on Security, in order to start the respective function. The following display

will appear:

3. Click on

, in order to enter a password.

4. A keyboard will appear. Enter a password with it.

Note

The password must consist of at least 4 symbols. Use a combination of

letters (A – Z) and numbers (0 - 9). Keep the password in a safe place.

5. Confirm the password with the symbol after you have entered it.

6. Enter the password in the second field to reconfirm it and in order to avoid poten-

tial careless mistakes.

Note

The password will be displayed in the form of small stars (****).