Instruction Manual

35 of 38
Types of Pixel Failures:
• Type 1:
A constantly lit pixel (a bright, white spot), even though it is not addressed. A
white pixel is caused when all three sub-pixels are lit.
• Type 2:
A pixel that does not light up (dark, black spot), although it is addressed
• Type 3:
Abnormal or defective red, green or blue sub-pixels. (E.g. constantly lit with half
the brightness, one colour is not shining, blinking or flickering, but not
belonging to Type 1 or 2 Pixel Failures).
In addition: A cluster of type 3 (= 2 or more defective sub-pixels in an array of 5 x 5
pixel). A cluster is an array of 5 x 5 pixel (15 x 5 sub-pixel).
EN 9241-307, Class II
Resolution Type 1 Type 2 Type 3
Cluster
Type 1, Type
2
Cluster
Type 3
1024 x 768 2 2 4 0 2
1280 x 800 3 3 6 0 3
1280 x 854 3 3 6 0 3
1280 x 1024 3 3 7 0 3
1366 x 768 3 3 7 0 3
1400 x 1050 3 3 8 0 3
98318_E7310 Generic EN Final MSN 4004 5635 Content rev1.indd 3598318_E7310 Generic EN Final MSN 4004 5635 Content rev1.indd 35 22.05.2013 13:39:0322.05.2013 13:39:03