Operation Manual

39
After Sales Support
Telephone: [phone]
Email: [e-mail]
 If you want to repeat the measurement, you should wait at least fi ve minutes.
The sleeve must be fully defl ated.
Measurement starts when the correct sleeve pressure has been reached. The
unit also measures your pulse. The value displayed will fall during measurement.
If the sleeve pressure is too low, the appliance stops measuring and infl ates the
sleeve again until suffi cient sleeve pressure is reached for the measurement.
The sleeve defl ates when the measurement is complete. The systolic and
diastolic blood pressure and the pulse with the pulse symbol appear on the
display.
The values measured will be automatically stored with the date and time once
measuring is complete. 30 storage spaces are available, whether you start
12450 AUS Final REV1 Content.indd 3912450 AUS Final REV1 Content.indd 39 24.08.2012 14:16:5424.08.2012 14:16:54