User`s manual
This DVD recorder can be set
easily by using the
buttons. To make selections,
move the yellow highlight bar
to the desired item with the
navigation buttons and then
press ENTER to confirm.
1. When the DVD recorder is
turned on for the first time,
the TV screen shows the
following message:
Press the direction keys to
choose the menu language,
then press ENTER to confirm.
2. Time and date:
Use the direction keys to
move the cursor. Use the
direction keys to change to the
correct the numbers. When you
are finished setting the time
and date, highlight
“Completed” and press ENTER
to confirm.
3. Selection of input signal:
Use the direction keys to
select the signal input source.
Press ENTER to confirm or select
”Skip” to complete this setting
later.
The DVD recorder auto-searches
the selected signal type to find
channels. When finished, the
screen shows:
4. Press ENTER to exit setup.
Channel searching done!
To exit press <ENTER> key
Please select signal type:
Cable
Antenna
Skip
Please set the time and
date:
AM/PM HH:MM AM 00:00
MM/DD/YY 00/00/00
Completed
Choose English menus
De Choose German menus
Press<ENTER> to continue
5MD 41035 DVD Recorder
Quick Start Guide
Primary Settings
The NTSC/PAL button cycles between normal NTSC,
NTSC progressive scan, and PAL viewing modes.
PAL/B is the TV-standard for TV broadcasts
in Singapore.
NTSC Progressive Scan can be used with a
component connection to a TV that supports
progressive scan to watch DVD movies at a higher
resolution.
NTSC is the TV-standard for North America and other
areas. Ifyou select NTSC, movies and television
programs in Singapore will appear incorrectlyon your
screen.
L
If you accidentally put the DVD recorder
into NTSC viewing mode, you will receive a
very bad image on your TV. If you are
having trouble displaying video properly,
one of the first things to check is whether
pressing the NTSC/PAL button fixes the error.
NTSC/PAL & Progressive Scan
NTSC/PAL
buttons and ENTER
L
A glossary of important terms appears on page 51 of your
manual.