Operation Manual
1
1
1
1
.
.
O
O
T
T
H
H
E
E
R
R
F
F
U
U
N
N
C
C
T
T
I
I
O
O
N
N
S
S
41
Deutsch English Italiano Français Nederlands
Dansk
Español Português Türkçe
1
1
1
1
.
.
O
O
T
T
H
H
E
E
R
R
F
F
U
U
N
N
C
C
T
T
I
I
O
O
N
N
S
S
1. “Aspect” button (Screen Aspect Ratio)
ARC - Aspect Ratio Control
* The Aspect button on top of the TV serves the same purpose as the
ARC button on the remote control.
* Normal: This sets the aspect ration to 4:3 for traditional TV pro-
grams. There will be black bars at either side of the screen.
* Periscope: Expands 4:3 video sources to fit the 16:9 screen by
magnifying the image at the edges of the screen. This creates less
distortion at the centre of the screen.
* Zoom: Some DVD movies may not fill the top and bottom of the
screen. The zoom function extends the height to fill the screen.
* FULL: This mode displays the picture 1 to 1 using full screen width
and height. A 16:9 signal will be displayed correctly. A 4:3 signal
will be stretched horizontally to reach full screen width.
* Cineramic: Allows displays in anamorphic film mode (2.35:1)
2. “APC” control button (Automatic Picture Control)
To view the APC settings one after the other, press the "APC" button
on the remote control repeatedly. The background lighting will be set
to "Normal", "Dimmed" or "Full". This setting enables you to adjust
the screen brightness to the ambient lighting. The setting "Full" is
preferable in bright environments, while the setting "Dimmed" is
more suitable for darker environments. This setting also affects
power consumption, which is lowest when set to "Dimmed".
3. Video/Audio output from the Scart 2 connector
If your video input source is TV/Video/S-Video/Scart 1, Scart 2 con-
nector would automatically output the signals. The mute settings
would not affect the signals output from Scart 2. When the video in-
put format is Scart 1 RGB, there will be no output from Scart 2. The
Scart 2 is capable of outputting CVBS and Y/C video signals. The
Scart 2 will not output signal after the power is off.