Operation Manual

ManualsBrandsMedion ManualsRemote ControlMD 80383 - 8 in 1

Contents

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Scope of application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Inserting batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Setting the date and time . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Programming device codes . . . . . . . . . . . . . . . . . . . . . . . 10

Entering the device code according to the Code List . . . . 10

Manual code search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Automatic search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Code searching by brand name . . . . . . . . . . . . . . . . . . . . . 13

Code identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Normal operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Operating individual devices . . . . . . . . . . . . . . . . . . . . . . . 15

Recording with the video recorder . . . . . . . . . . . . . . . . . . 15

Operating combined devices . . . . . . . . . . . . . . . . . . . . . . . 16

Learn function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Notes on learn function . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Programming the functions . . . . . . . . . . . . . . . . . . . . . . . . 18

SHIFT function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Deleting functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Programming macros . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Incorporating delays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Executing macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Deleting macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Univ-FB_MD80383_AUS.fm Seite 2 Dienstag, 24. Januar 2006 8:57 08

Summary of content (25 pages)

PAGE 1
Univ-FB_MD80383_AUS.fm Seite 2 Dienstag, 24. Januar 2006 8:57 08 Contents Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Scope of application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Inserting batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Setting the date and time . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 2
Univ-FB_MD80383_AUS.fm Seite 3 Dienstag, 24. Januar 2006 8:57 08 Special functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ALL OFF function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Easy ProGramming and TV Channel Preview . . . . . . . . . . . Universal functions (“Punch Through”) . . . . . . . . . . . . . . . . 22 22 22 23 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Disposal . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
Univ-FB_MD80383_AUS.fm Seite 4 Dienstag, 24.
PAGE 4
Univ-FB_MD80383_AUS.fm Seite 5 Dienstag, 24.
PAGE 5
Univ-FB_MD80383_AUS.fm Seite 6 Dienstag, 24.
PAGE 6
Univ-FB_MD80383_AUS.fm Seite 7 Dienstag, 24. Januar 2006 8:57 08 Safety instructions Before using the remote control for the first time, please read these instruction carefully. Keep the instructions in a safe place for reviewing purposes or for passing them on to third parties. The appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance.
PAGE 7
Univ-FB_MD80383_AUS.fm Seite 8 Dienstag, 24. Januar 2006 8:57 08 Inserting batteries 2 micro batteries LR03 AAA are required. We recommend using alkaline batteries for longer durability. ` Remove the battery compartment cover by pushing the clip in the direction of the cover. ` Insert both batteries into the compartment while observing the +/polarity. ` Replace the cover. If the batteries have been inserted correctly, the time display 0:00 will appear in the display.
PAGE 8
Univ-FB_MD80383_AUS.fm Seite 9 Dienstag, 24. Januar 2006 8:57 08 Time settings in 24 and 12 hour mode An ‘H’ in the display indicates the 24-hour mode. If you press the T/D key beyond “24”, an ‘A’ will appear. You are now in the morning hours of the 12-hour mode. If you press the T/D key beyond “12”, a ‘P’ will appear. You are now in the afternoon hours of the 12-hour mode. 6. Continue pressing T/D, until the current hour appears. 7.
PAGE 9
Univ-FB_MD80383_AUS.fm Seite 10 Dienstag, 24. Januar 2006 8:57 08 Programming device codes For every device that you would like to operate using the universal remote control, you must program a three-digit device code to a source key (TV, VCR, DVD, CD, CBL, ASAT, DSAT, AUX) . The names on the keys are only for reminder purposes. You can assign any key to any device (“Flex Mode”). For combined devices (e.g.
PAGE 10
Univ-FB_MD80383_AUS.fm Seite 11 Dienstag, 24. Januar 2006 8:57 08 If the entered code was valid, the light of the source key will extinguish after the last digit has been entered. If an invalid code was entered, the source key will flash for three seconds before extinguishing. If the device does not respond as expected, repeat the programming, or try a different code. Please try all the codes specified for your brand.
PAGE 11
Univ-FB_MD80383_AUS.fm Seite 12 Dienstag, 24. Januar 2006 8:57 08 Automatic search If your device does not respond to the remote control even though you have tried all of the codes listed for your device type and the relevant brand, then try using the automatic search. This will enable you to find codes for brands that were not listed in the device Code List. 1. Switch the relevant device on manually. 2. Keep the S (SETUP) key pressed down for approx.
PAGE 12
Univ-FB_MD80383_AUS.fm Seite 13 Dienstag, 24. Januar 2006 8:57 08 Code searching by brand name This function offers you the option of searching by brand name. You can find the brand name in the Code Table under “Code Search by Brand Name”. This is done as follows: 1. Switch the relevant device on manually. 2. Keep the S (SETUP) key pressed down for approx. 3 seconds, the background lighting of the source key will flash for a short time and then remain permanently lit.
PAGE 13
Univ-FB_MD80383_AUS.fm Seite 14 Dienstag, 24. Januar 2006 8:57 08 Code identification Code identification gives you the opportunity to determine codes that have already been entered and stored in the remote control. Proceed as follows: 1. Switch the relevant device on manually. 2. Keep the S (SETUP) key pressed down for approx. 3 seconds, the background lighting of the source key will flash for a short time and then remain permanently lit. (Briefly pressing the SETUP key will activate the SHIFT function.
PAGE 14
Univ-FB_MD80383_AUS.fm Seite 15 Dienstag, 24. Januar 2006 8:57 08 Normal operation Operating individual devices After you have finished programming your remote control for your audio/video devices, the remote control will work in the common main functions just like the original remote control of the respective device. Point your remote control at the desired device and press the relevant source key. The key will light up briefly but will not remain lit.
PAGE 15
Univ-FB_MD80383_AUS.fm Seite 16 Dienstag, 24. Januar 2006 8:57 08 Operating combined devices Several controlling options are available to combined devices. Combined devices with two device codes Some combined devices (e.g. TV set with video recorder) require two device codes - one for each device part. The combined device is then controlled like two separate devices. Combined devices with one device code Other combined devices only require one code.
PAGE 16
Univ-FB_MD80383_AUS.fm Seite 17 Dienstag, 24. Januar 2006 8:57 08 Learn function You can manually save the functions of an original remote control to your universal remote control. The universal remote control can “learn” up to 150 commands. Notes on learn function Use new batteries for both remote controls. One original remote control can be saved to every source key (8in-1 function). Once the memory is full, the background lighting of the source key will flash for 3 seconds.
PAGE 17
Univ-FB_MD80383_AUS.fm Seite 18 Dienstag, 24. Januar 2006 8:57 08 Programming the functions To programme, proceed as follows: Place the remote controls with the infrared diodes facing each other spaced 15 to 50 mm apart on the table. 1. Keep the S (SETUP) key pressed down for approx. 3 seconds, the background lighting of the source key will flash for a short time and then remain permanently lit. (Briefly pressing the SETUP key will activate the SHIFT function.) 2.
PAGE 18
Univ-FB_MD80383_AUS.fm Seite 19 Dienstag, 24. Januar 2006 8:57 08 SHIFT function Some of the keys of the universal remote control can have double assignations. To use these functions, briefly press the S (SETUP) key (the source key will light up) and then press one of the function or number keys. If no other key is pressed for 15—20 seconds after the SETUP key was briefly pressed, the SHIFT function will not become active. Deleting functions Deleting commands for only one source key 1.
PAGE 19
Univ-FB_MD80383_AUS.fm Seite 20 Dienstag, 24. Januar 2006 8:57 08 Programming macros Using a macro, you can save a chain of commands, meaning that several functions can be executed consecutively. You can program three macros and store them on the number keys 1, 2 and 3. Each macro can include up to ten key commands. A macro can include different devices. In this way you could, for example, switch on the TV set, the desired channel, the video recorder and the recording function. 1. Switch the device(s) on.
PAGE 20
Univ-FB_MD80383_AUS.fm Seite 21 Dienstag, 24. Januar 2006 8:57 08 Incorporating delays It can be useful to incorporate a time delay before a command step in order to take the warm-up phase of the TV set into consideration, for example. 1. While entering the steps (see Point 6 above) press the PAUSE key at the spot where the time delay should be incorporated. 2. Press a number key corresponding to the seconds by which you would like to delay (e.g. “4” for a 4-second delay). The maximum delay is 9 seconds.
PAGE 21
Univ-FB_MD80383_AUS.fm Seite 22 Dienstag, 24. Januar 2006 8:57 08 Special functions ALL OFF function You can switch off all pre-programmed devices at the same time. This is done as follows: 1. Briefly press the ALL OFF key. The selected device switches off and the relevant source key will light up. 2. Immediately press the ALL OFF key again and keep it pressed down for 3 seconds. Now all pre-programmed devices will be switched off consecutively. This takes about 3 seconds.
PAGE 22
Univ-FB_MD80383_AUS.fm Seite 23 Dienstag, 24. Januar 2006 8:57 08 TV Channel Preview In the TV mode, after pressing the EPG key once, all stored channels will be switched through (the remote control must be pointed permanently at the device). To stop the function, press PROG+ or PROG– . Universal functions (“Punch Through”) The universal functions (also called “Punch Through” functions) enable you to carry out certain functions on a different device type than the programmed one.
PAGE 23
Univ-FB_MD80383_AUS.fm Seite 24 Dienstag, 24. Januar 2006 8:57 08 3. Press a source key for the device to which the volume and mute functions should be transferred to. The light for this source key will remain lit. 4. Press the key; the source key light will extinguish. If you accidentally selected a device that does not have its own volume control, the source key will flash for 3 seconds.
PAGE 24
Univ-FB_MD80383_AUS.fm Seite 25 Dienstag, 24. Januar 2006 8:57 08 3. Press again. The source key light will extinguish completely. The volume and mute functions are now restored to their factory defaults. Troubleshooting The remote control does not work: Check whether your devices have been properly connected and are switched on. Check whether the remote control batteries have been correctly inserted and have matching +/- polarity. If the batteries are too weak then replace them with new ones.
PAGE 25
Univ-FB_MD80383_AUS.fm Seite 26 Dienstag, 24. Januar 2006 8:57 08 Disposal Packaging Your universal remote control is wrapped in packaging to protect it against transportation damage. Packaging is raw material and can be re-used or added to the recycling system. Device At the end of its life, the universal remote control should not be disposed of in household rubbish. Seek the advice of your local authority on correct, environmentally-friendly disposal.