Operation Manual

15
Memory storage option
The options include SD Card and internal memory.
TV signal output Type
NTSC and PAL TV outputs are available from this unit.
Dwelling time for slide show
This unit provides five choices of dwelling time for slide show: 1 sec, 2 sec, 4 sec, 10 sec and 30 sec.
Automatic Turn-Off time
This unit offers five automatic turn-off options: Off, 1 minute, 2 minutes, 3 minutes, and 5 min-
utes, the system default value is 3 minutes.
Formatting memory card
To ensure that your memory card or internal memory function correctly, we suggest that you for-
mat them the first time you use them. The following window will appear under the SD card or in-
ternal memory status, respectively (as shown in the figure). Simply select "Yes" to format SD card
or internal memory.
LCD brightness tuning
Options are: 100%, 80%, 60%, 40% and 20%.
100% is high brightness while 20% is low brightness.
LCD contrast tuning
Options are: 100%, 80%, 60%, 40% and 20%.
Memory capacity status
It shows two memories capacity status : Internal memory and SD card .
Set to default values
If the system is in a state of disorder due to personal setup, you can use Set Default function, to
restore all setup to default values.
System version
After Right or Enter button is pressed, the current software version will be displayed. This function
is to provide service information for the distributor for after sale tracking.
TV out display operation
When connecting this device to a TV set via AV cable, you can use the TV screen as the display to
operate all the functions in the device.
Reset of the MP4-Player
Because of incorrect inputs or because of an error in the data transmission, the MP4-Player does
not respond to the commands. In this case, proceed as follows:
1. Remove the battery and insert it again.