Operation Manual

67 of 86
DE
EN
9. First operation
The remote control is supplied with a lithium battery (CR2025, V3).
 To activate the remote control, simply remove the protective film from the bat-
tery compartment.
9.1. Changing batteries
 Open the battery compartment by pulling it out of the remote control at the in-
dentation.
 Remove the used batteries.
 Insert a new lithium battery CR2025 with the positive pole (smooth side) facing
up.
 Slide the compartment back into place.
84003 DE EN eCommerce Content final REV4.indb 6784003 DE EN eCommerce Content final REV4.indb 67 28.05.2015 09:09:1928.05.2015 09:09:19