Operation Manual
22
Flash (Picture Record Mode Only)
This camera has two flash settings. To change flash setting by either hot key (Right Button) or
Option Setting.
Auto-flash( ):the flash fires automatically according to light conditions. Use this mode for
general photography.
Flash Off( ):the flash will not fire under any circumstances. Use this mode when taking
images in a place where flash photography is prohibited, or when the subject is distant
(beyond the range of the flash).
To change Flash setting:
1. When in Camera Mode, use Up/Down Buttons to select Flash Option, then press Enter
Buttons to switch to Flash submenu.
2. Use Up/Down Buttons to move between 2 settings.
3. Press Enter Button to validate the setting and exit.
Note
z The flash will be disabled automatically
when battery power is low (
)
Display Screen Flash Options
Enter Button