Operation Manual

18
Charging the battery
Proceed as follows to charge the battery:
 Take the USB cable of the accompanying USB power pack and connect it to
the USB connection of the camcorder.
 Push the USB power pack into a mains socket, if you use it.
 The Video LED and Replay LED on the back of the device will flash during
the charging process.
 The Video LED and the Replay LED will go out when the battery is
completely charged.
 Then remove the USB power pack from the mains socket and the USB cable
from the device.
NOTE:
The camcorder must be switched off during the charging process.
It is recommended to charge the battery for about 8 hours for the
optimum capacity.