Operation Manual

22 of 74
PLEASE NOTE!
Only use the headset supplied.
If the set volume exceeds a level that could damage your
hearing, the device will block any further increases in
volume and the
symbol will be displayed in the
bottom right of the display.
 Tap on the symbol and follow the instructions
given.
 Mark the field underneath the instructions to
confirm that you have read and understood them.
 Now tap on OK.
PLEASE NOTE!
After the device has been restarted, it will be
necessary to reset the volume. If you remove
the headphones from the device and then
reconnect them, it will also be necessary to
reset the volume.
E10315_6 EN Generic Final Content.indd 22E10315_6 EN Generic Final Content.indd 22 04.12.2013 10:27:5804.12.2013 10:27:58