Operation Manual

19 of 66
5. About this device
Thanks to its removable display, this device is designed for use in notebook mode as
well as tablet mode.
5.1. Use in notebook mode
A simple connection to the base unit turn the tablet unit into a notebook.
 Hold the tablet unit firmly with both hands and place it onto the mounting
fixtures on the base unit until it audibly clicks into place.
ATTENTION !
Place the tablet unit carefully and centrally in the mounting
fixtures on the base unit to avoid damage.
5.2. Use in tablet mode
 Slide the display release (8) to the left and, at the same time, carefully lift the
tablet unit out of the mounting fixtures on the base unit.
6. First Use
To operate your Notebook safety and ensure a long service life, you should read the
“Operational safety” chapter at the beginning of this manual. All operating software
is already fully preinstalled on the Notebook so there is no need for you to install
any more drivers and you can get started right away.
 Connect the supplied mains adapter to the base unit (22). Next, connect the
power cable to the adapter and then plug it into a mains socket.
REMARQUE !
Alternatively, you can connect the mains adapter to the mains adapter
connection on the underside of the tablet unit (23), if you only plan to
work with the tablet unit.