Operation Manual

Before first use

Heat appliance while empty

Before using the microwave the appliance must be heated up while empty first

so that production residues can evaporate. Turn on the appliance in the grill

mode without any food and accessories as follows.

• Open the door and remove any packaging or accessory parts from the

cooking chamber. Then close the door again.

•Press the Grill button once. You have selected the grill mode. The

symbol will appear in the display.

• Use the turning knob Menu/Time to set a cooking time of 10 minutes.

•Press the Menu/Time button to start the heating process.

Note:

During this initial heating period you may notice faint odours. These vapours

are not dangerous and will disappear after a short time. Make sure you

have adequate ventilation, e. g. by opening a window.

• After 10 minutes the appliance turns itself off automatically. Wait until it

has completely cooled down.

• Remove the plug from the socket and then clean the appliance once more

inside and out with a damp cloth and then thoroughly dry it off.

Using accessories

After the microwave has been heated up in an empty state as described

above, it may never again be put into operation without properly placed roll

star and rotating dish.

• Put the roll star in the cooking chamber over the drive axis.

• Place the rotating dish on the roll star in such a way that the notches in the

rotating dish lock onto the drive axis.

Mikrowelle MD 11471 UK.book Seite 13 Montag, 25. Juni 2007 5:39 17