Operation Manual

Display Properties

This Windows program offers you the possibility of adapting the display to your monitor. This includes

items such as the background image, the screen saver, the Active Desktop (Web) as well as other set-

tings for your monitor and video card.

The program can be started as follows:

• Right mouse click on Windows desk top and left mouse click on "Properties".

• Start the "Display" program in "System control“.

The resolution can be set under “Screen resolu-

tion”. (n). Your monitor can display a maximum

of 1680 x 1050.

Then click "Color quality"

(o)to set the color

depth (number of colors displayed). Your moni-

tor supports a maximum color depth of 16 mil-

lion colors corresponding to 32 bit or "True

Color“.

This resolution is equivalent to the physical reso-

lution. TFT screens reach their full image quality

at their physical resolution.

The image repeat frequency can be set under

"Advanced“ (p).

A window with the characteristics of your video card appears depending on the configuration of your

computer.

Under “Adapter” you can change the desired

value in the selection field “List All Modes…”.

The value for the LCD should be 60 Hz and, de-

pending on the setting, not exceed 75 Hz.

(similar picture)

Attention!

If your setting does not coincide with the values supported by your display, you may not

see any image.

Switch your old device on again and set the applicable values under ‘Display Character-

istics’ in accordance with the aforementioned options in this case.