Operation Manual

12
After switching on the unit for the first time
You will be guided through the FIRST TIME INSTALLATION menu after you switch the device on for the first
time. The menu appears initially in German. You can change the language while you are making these initial
settings.
You can always access the first-time installation screen again via
Functions > Installation and go through
the settings again. See also page 21.
COUNTRY
The first menu option
COUNTRY is highlighted. Use the arrows  to select the
country in which you are currently located.
LANGUAGE
Use the up/down arrows  to go to the
LANGUAGE menu option. Use the direction
arrows  to select the language for the OSD (the menu language).
DELETE PROGRAM
All existing programmes are usually deleted during the search program option. If you
don’t want this to happen, set the
DELETE PROGRAM option to NO.
SEARCH PROGRAM
If you want to run the search program option, set the
SEARCH PROGRAM option to
YES. If you only want to delete programs and don’t want to search for new
programmes, set this option to
NO.
` Use the arrow keys to select the field
YES and press ENTER to run the search.
` The search function make take a few minutes to complete. Wait for it to finish.
Channel selection
• To select a channel, either press the buttons CH+/– (on the device or on the remote control) or select the
channel directly by pressing the appropriate numbers.
To enter a two or three-digit number press the
-/-- button twice or three times and then enter the two-
digit channel number.
• Press the
button to select the last channel played.