Operation Manual

13
EN
Setting the volume
` You can increase or decrease the volume by pressing the volume buttons on the remote control or
on the device.
` Use the mute button to switch the volume fully off and on again.
` Use the
NICAM button to select mono or stereo playback, sound I and sound II. Sound I and sound II can
only be heard when the current TV channel supports dual mode (e.g. for bilingual programmes).
` Use the
SMODE button to switch between the following sound modes: Standard, Music, Voice,
Theatre, Personal. The Personal setting is defined under the menu option SOUND > SOUND MODE.
Picture settings
` Use the PMODE button to switch between the following picture modes: Standard, Movie, Mild, Game,
Personal. The Personal setting is defined under the menu option PICTURE > PICTURE MODE.
` Depending on the programme, the pictures are displayed in the formats 4:3 or 16:9. Use the
ASPECT
button to adjust the picture format:
AUTO: The format displayed is automatically adjusted to match the input signal.
FULL: A 16:9 picture (“letterbox“) is zoomed to the full screen
size.
4:3: For undistorted screen display in 4:3 format.
14:9: For undistorted screen display in 14:9 format.
ZOOM*: A picture in 14:9 format (“letterbox“) is stretched at the
top and bottom margins of the screen.
You can also change these settings in
FUNCTION > VIDEO SIZE.
Displaying information
` Press the DISPLAY button to display the following current settings:
– Channel position
– Colour system Sound system
` You can get the same information when you switch over to a different channel