User`s manual

MEDION-Navigator 4.4
Installation and quick-start guide - 18 -
7. Insert the power jack into the cigarette lighter.
2.2.5 Fitting MEDION-Navigator on your bike
Mount the fitting...
1. Connect the clamp
and the mounting plate . Pull the
clamp round the handle bar as represented above (opening
up, plate towards the driver). Do not forget to put the rubber
band
, which is included in the delivery between the handle
bar and the clamp. The clamp is flexible, so you can open it
carefully, place it round the handle bar and close it.
2. Put the cradle of the device
onto the mounting plate .
Push the holder downwards until it snaps in noticeably. Please
note that there is only one correct position for the holder to
be fitted.
3. Fix the complete holder kit with the included screw
. Fasten
the screw only slightly for the moment.