User`s manual

MEDION-Navigator 4.4
Appendix - 70 -
5.1 Configuration of MEDION-Navigator
Configuration In MEDION-Navigator, you may modify the following settings:
 Map information, see below.
 Route information, see page 71.
 Volume, see page 71.
 Representation, see page 72, see page 73.
 Touch screen calibration, see page 72
 Auto mode, see page 72.
 Speed profile, see page 73.
 Itinerary, see page 73.
 Time zone, see page 73.
 Itinerary, see page 73.
 Format, see page 73.
 Home address, see page 74.
 Radio-Mute, see page 74
On the main screen, tap the Settings button to configure
MEDION-Navigator.
On the S
ETTINGS screen, tap the Save button to apply your
modifications if you have made some.
5.1.1 Map information
Info on the map On the MAP INFORMATION screen, you may effect the following
modifications:
Element Signification
Info bar
The Info bar at the bottom of the map
displays the scale of the map, the compass,
and the current speed.
Tap the respective command button to
display (On) or not (Off) the Info bar.
Points of Interest
Tap the respective command button to
display (On) or not (Off) Points of
Interest on the map.
Street names
Tap the respective command button to
display (On) or not (Off) Street names on
the map.