Operation Manual

EN-16
3. Connect the vehicle antenna plug to the radio antenna socket.
4. Connect the cable with the coloured sockets to the appropriate
connectors in the car according to the identification (also refer to the
following chapter).
If you use an external amplifier, you can connect it to the red/white RCA
audio sockets. Please also refer to your instructions for the amplifier.
Connect the hand brake cable
The DVD player may only be operated when the vehicle is standing and the
hand brake is activated. For this purpose, the pink-black hand brake cable
must be connected to the hand brake.
Schematic diagram of connection –
may only be performed by specialists:
1. Pink-black hand brake cable "PARKING BRAKE (B–)" to car radio
2. Hand brake
3. Hand brake switch for hand brake display in dashboard
4. Terminal to connect the pink-black cable
5. Hand brake display to dashboard
6. Car battery
7. Car body
8. Existing earthing cable (connected to car body)
Connect rear view camera cable
If your vehicle is equipped with a rear view camera, you can transfer the
image of this camera while in reverse to the display of the car radio. To do so,
connect the pink rear view camera cable:
82339 DVD-Autoradio DE Content.book Seite 16 Mittwoch, 29. April 2009 8:41 08