Instruction manual

EN
17 of 42
Phone: [phone]
Internet: www.medion.com.au
After sales support
6. Connecting External Devices
6.1. Connecting Headphones
The headphones are connected to the headphone socket. The headphone volume is controlled using the volume buttons and
the
button on the remote control. When headphones are connected, the sound output of the main speakers is switched
off.
WARNING!
Using headphones at high volume generates excessive acoustic pressure and can result in permanent hearing
damage. Before pressing play, set the volume to the lowest setting. Start playback and increase the volume to a
comfortable level. Changes to the basic equaliser settings can increase the volume and thus damage your
hearing permanently.
WARNING!
Using headphones to listen to a device at high volumes for an extended period can damage your hearing.
6.2. Digital Ampli er via Coaxial Connection
By using the SPDIF COAX OUT connection, you have the possibility of outputting the audio signal of your Direct LED LCD TV
via a digital amplifier.
 To do this, connect a coaxial cable to the SPDIF COAX OUT output on the D-LED LCD TV and the corresponding input on
the amplifier.
6.3. Connecting a DVD player
There are a number of options for connecting a DVD player:
6.3.1. Stereo Cinch/RCA Cable and a Video Cinch/RCA Cable
 Connect a video cinch/RCA cable (yellow jack) to the video input on the D-LED LCD TV and the video output on the
external device.
 Connect a stereo cinch/RCA cable (red and white jack) to the audio input on the D-LED LCD TV and the video outputs on
the external device.
6.3.2. Component Video Cable (3 x Cinch/RCA)
 If the DVD player has YUV outputs (Y Pb Pr), we recommend connecting the player to the YPbPr inputs on the D-LED LCD
TV using a component cable (cinch/RCA cable green/blue/red)
 Connect a stereo cinch/RCA cable (red and white jacks) to the AUDIO L – R inputs to transmit audio.
6.3.3. HDMI Cable
 If your device has a HDMI output, connect a HDMI cable (not supplied) to the HDMI input of the D-LED LCD TV and to the
HDMI output of the external device.
6.4. Connecting a Video Recorder (VCR)
 Connect an antenna cable between the antenna socket on the D-LED LCD TV and the output on the video recorder.
 Connect an additional antenna cable between the antenna input on the video recorder and the antenna socket in the wall.