Instruction manual
18 of 42
Phone: 1300 884 987
Internet: www.medion.com.au
After sales support
6.5. Connecting a DVD Recorder
Connect an antenna cable to the antenna socket on the D-LED LCD TV and the antenna output on the DVD recorder.
Connect an additional antenna cable between the antenna input on the DVD recorder and the antenna socket in the wall.
6.5.1. Component Video Cable (3 x Cinch/RCA)
If the DVD recorder has YUV outputs (Y Pb Pr), we recommend connecting the recorder to the YPbPr component inputs on
the D-LED LCD TV via a component cable (cinch/RCA cable green/red/blue).
Connect a stereo cinch/RCA cable (red and white jacks) to the AUDIO L – R inputs for sound transmission.
6.5.2. HDMI Cable
If the DVD recorder has a HDMI output, connect a HDMI cable (not included) between the HDMI input on the D-LED LCD TV
and the HDMI output on the external device.
6.6. Connecting a Set Top Box (SAT, SD/HD DVB-T, Decoder, Etc.)
There are different options for connecting a receiver (e.g. SAT, SD/HD DVB-T, Decoder, etc.) to your Direct LED LCD TV.
6.6.1. Stereo Cinch/RCA Cable and a Video Cinch/RCA Cable
Connect a video cinch/RCA cable (yellow jack) between the video input on the D-LED LCD TV and the video output on the
external device.
Connect a stereo-cinch/RCA cable (red and white jacks) between the audio inputs on the D-LED LCD TV and the audio
outputs on the external device.
6.6.2. HDMI Cable
If the external device has a HDMI output, connect a HDMI cable (not included) between the HDMI input on the D-LED LCD
TV and the HDMI output on the external device.
6.6.3. Component Video Cable (3 x Cinch/RCA)
If the device has YUV outputs (YPbPr), we recommend connecting the device to the Y-Pb-Pr component inputs on the
D-LED LCD TV via a component cable (cinch/RCA cable green/red/blue).
Connect a stereo cinch/RCA cable (red and white plugs) to the AUDIO L – R inputs for sound transmission.
6.7. Connecting a DVD/video recorder and SAT receiver
If you want to connect a DVD or video recorder and a SAT receiver at the same time, you can do so as follows:
Connect the receiver as described above.
Now connect the receiver by plugging a SCART cable (not supplied) into the SCART output on the DVD recorder and the
corresponding SCART input on the receiver.
Connect an aerial cable between the aerial socket on the D-LED LCD TV and the aerial output on the recorder.
Connect an additional aerial cable between the aerial input on the DVD recorder and the aerial output on the receiver.
Connect the SAT receiver to the LNB on the parabolic antenna.
6.8. Connecting a Camcorder
6.8.1. With a Stereo Cinch/RCA Cable and a Video Cinch/RCA Cable
To play back images and sound on your D-LED LCD TV connect the camcorder to the AUDIO-IN sockets and VIDEO-IN
sockets on the D-LED LCD TV.
6.9. Device with HDMI or DVI Output
HDMI („High Definition Multimedia Interface“) in consumer electronics is the only interface that transmits audio and video
data simultaneously. It handles all image and sound formats currently in use, including HDTV (High Definition TV), which
means it can also display resolutions of 1080i without any loss in quality.
Many consumer electronic devices, e.g. DVD players, are now equipped with HDMI outputs.
6.10. Connecting an External Device with HDMI Output
Switch both devices off.
Connect a HDMI cable (monitor cable; not supplied) to the HDMI input of the D-LED LCD TV and to the HDMI output of the
external device.
Switch the D-LED LCD TV on when the HDMI device is connected.
Switch on the external HDMI playback device.