Instruction manual
EN
19 of 42
Phone: 1300 884 987
Internet: www.medion.com.au
After sales support
6.11. Connecting an External Device with DVI Output
If the external device has a DVI output then you can also connect it to the HDMI input (HDMI is downwards compatible to DVI
– “Digital Visual Interface”). For this you will need a HDMI-DVI adapter. The DVI output does not transmit sound so you will have
to connect an audio cable in addition.
Connect a stereo cinch/RCA cable with 3.5-mm jacks to the VGA AUDIO-IN socket to transmit sound.
6.12. Connecting a PC or Notebook
The D-LED LCD TV is connected to your PC or Notebook like a monitor or additional monitor. The picture on your notebook or
PC is then transmitted to the Direct LED LCD TV.
Connect the Direct LED LCD TV to the PC as follows:
Switch both devices off.
Connect a VGA cable (monitor cable; not supplied) to the VGA input of the Direct LED LCD TV and to the graphic card
output of the PC or Notebook.
Tighten up the screws of the monitor cable with your fingers, so that the plug is correctly seated in the socket.
If you want to transmit a sound signal, connect an audio cable from the PC AUDIO-IN socket and PC/notebook Audio
output
First switch on the Direct LED LCD TV.
Use INPUT to select PC mode.
The PC display appears on the D-LED LCD TV. Use the INPUT button to return to the TV mode.
If you use the Direct LED LCD TV as a second monitor for your PC you might have to change the display properties of
your operating system. To do this please read the operating instructions of your PC/notebook to find out the operational
requirements if more than one monitor is used.
7. Basic OSD Menu Settings
You can customise certain functions of the OSD (On-Screen Display) menu.
7.1. Navigating within the Menu
Press the MENU button to activate the OSD. The available options are displayed on the lower edge of the screen.
You can use the direction keys to select the options from the main menu.
Use to switch over to the menu entries.
You can use the direction keys to select the options from any of the menus.
Press MENU to return to the main menu.
Use the direction button to access a sub-menu (not every menu has a sub-menu option).
Press MENU to return to the next-higher menu.
Use the direction buttons to enter a desired value or make another selection.
Press EXIT to close the menu and also confirm your selection.
Please remember that the menu will close automatically after a couple of seconds if you don’t press a button.
You can select the following main menus:
• Menu PICTURE
• Menu SOUND
• Menu CHANNEL
• Menu FEATURE
• Menu SETUP
PLEASE NOTE!
Technical changes to the device means the menus described here may differ from the menus actually displayed on
the screen.
Not all menus will be available, depending on the source you have selected. Switch to a different source to access all
available menus.