Instruction manual

20 of 42
Phone: [phone]
Internet: www.medion.com.au
After sales support
7.2. Picture Menu








 2N ([LW 0HQX
Exit ReturnOkMove
Picture
Standard
50
50
50
5
Standard
Picture
Picture Mode
Brightness
Contrast
Sharpness
Colour
Tint
Colour Temperature
Aspect Ratio
50
Sound
Channel
Feature
Setup


Auto
Menu item Setting
PICTURE MODE
Select picture mode: DYNAMIC, STANDARD, MILD, USER. This function corresponds to the
PICTURE button.
BRIGHTNESS
Increase or decrease brightness (on a scale of 0 – 100).
CONTRAST
Increase or decrease contrast (on a scale of 0 – 100)..
SHARPNESS
Increase or decrease sharpness (on a scale of 0 – 100)..
COLOUR
Increase or decrease colour (on a scale of 0 – 100).
TINT
Hue settings only available for NTSC reception.
COLOUR
TEMPERATURE
Select colour temperature: STANDARD, COOL and WARM.
ASPECT RATIO
Set the picture format here.
This function corresponds to the button ASPECT.
NOISE REDUCTION
This function reduces picture noise and improves image quality when the signal is weak. Choose
between LOW, MIDDLE, HIGH and OFF.
7.3. Sound Menu







 2N ([LW 0HQX
Exit ReturnOkMove
Sound
User
50
50
Off
0
PCM
Sound
Sound Mode
Bass
Treble
Balance
Surround
AVL
SPDIF
Picture
Channel
Feature
Setup
Off
Menu item Setting
SOUND MODE
Select audio mode: STANDARD, MOVIE, MUSIC, SPEECH, USER. This function corresponds to
the SOUND button.
BASS
Increase or decrease bass (on a scale of 0 – 100).
TREBLE
Increase or decrease treble (on a scale of 0 – 100).
BALANCE
Set the balance between the left and right speakers.
SURROUND
Activate/deactivate the surround sound effect.
AVL
The function AVL (Automatic Volume Limiting) compensates for the various volumes of the different
channels. If you set to OFF, you will hear the original volumes. If you set to ON, you will hear a
balanced volume.
SPDIF
Select the spdif mode.