Instruction manual

EN
25 of 42
Phone: [phone]
Internet: www.medion.com.au
After sales support
7.6. Setup Menu






 2N ([LW 0HQX
Exit ReturnOkMove
Setup
Off
OK
OK
Setup
OSD Timer
PC Setup
Blue Screen
Reset TV Setting
Auto Installation
Software Upgrade
Picture
Sound
Channel
Feature
OK
OK
Aus
Menu item Setting
OSD TIMER
Set the time after which the OSD menu will close automatically.
PC SETUP
Change the PC settings in PC mode.
AUTO
ADJUST
If you want to shift the image, select AUTO ADJUST and press OK to
move it back to the centre. This should be done in the full image mode to
ensure the settings match.
H POSITION
You can use  to change the horizontal position of the picture.
V POSITION
You can use  to change the vertical position of the picture.
PHASE
If the PC picture is not clear, you can use  to adjust the picture signal
to suit the D-LED LCD TV pixels. This will result in a clear image with an
even, sharp display.
CLOCK
With this setting, the picture signal is synchronised to match with the
monitor’s pixel rate. This corrects errors that can appear as vertical stripes
in pixel-dense images (like tables or text with small fonts). Set the pixel
frequency using .
BLUE SCREEN
(not in DTV mode)
If the D-LED LCD TV is not receiving a signal, the screen will turn blue instead of displaying
the “snow” or a black background.
RESET TV SETTING
Restore the factory settings here. This allows you to reset the device or the memory.
AUTO INSTALLATION
Here you can access the menu for the initial installation.
SOFTWARE UPGRADE
Here you can carry out a software update for the device with the help of a USB storage
medium.