Instruction manual
26 of 42
Phone: 1300 884 987
Internet: www.medion.com.au
After sales support
8. Media Mode
The D-LED LCD TV comes with 1 USB port (rear) that can be accessed via Media mode.
8.1. Media Mode and USB Connectivity
Plug in your external USB device (USB stick, external hard disk drive) into the USB port of the TV. Drive numbers (C:\, D:\,
E:\ etc) will be allocated depending on the partitions of the USB device (e.g. an external hard disk drive might have several
partitions). For the definition of how drive numbers are assigned, please see “Drive Assignment Definition” below. (Please
note that external USB memory devices of a capacity of up to 1 TB are supported. However, not all brands and drivers of
external USB memory devices might be compatible with this D-LED LCD TV)
You can select the drive for your recording session.
Please note that the external USB device needs to be formatted first before the recording can be done. To do this, under
DTV mode, in the OSD, go to PVR/TIMESHIFT page then select PARTITION SELECT and “FORMAT”.
Select disk drive by pressing “OK”.
At the next screen you will have option to select USB device if there is more then one and to select drive with directional
pad on the remote control (C:\, D:\ etc)
Press “OK” to format.
You can select to format the USB device into FAT32 file system or High Speed FS system by using directional pad on the
remote control:
− FAT32 is suitable for USB thumb drive (USB memory sticks) that will format the entire USB drive completely. (Attention:
All data currently on the USB memory stick will be lost. Please save your data on your external USB memory stick prior
to using it as a recording device)
− High Speed FS is suitable for external USB hard disk drives that will allow choosing how large a new partition allocated
for recording will be.
− While recording, on your external USB device a new folder will be created labelled “MSTPVR”.
The OSD will show the file format and size selected, how many minutes of the TV program can be recorded in either SD
quality or HD quality from the source media.
After selecting the system type and size, press OK again will start the formatting.
After the USB device has been formatted, it can be used for recording under DTV mode.
The default recording drives will always be C:\, unless different drive is selected using method from 2-7.
The recording function can be achieved in 2 ways:
− Press the REC button directly while watching DTV programs.
− Go to PVR/TIMESHIFT page then select „RECORD START“
8.2. Recording via REC Button
While watching DTV programs, press the REC button on the remote control.
A symbol for recording will be shown in the upper left-hand corner of your screen.
Make sure that the allocated capacity for the recording is sufficient to complete the recording of the program you want to
save. (The capacity is determined by how large the formatted PVR file folder is allocated, or how large the USB thumb drive can
support.)
8.2.1. Time Shift Function
During any recording, you can press the “PLAY” button to start watching the program that is being recorded. The recording
itself will continue in the background while you can watch the recorded program from the start.
While watching/playing the recording program this way, you can use all the media functions (fast forward, fast backward
and pause etc) for the playback.
Press the STOP button to stop the watching session and return to the recording interface.
8.3. Switching between TV Mode and Media Mode
Use INPUT to call up the source selection list.
Use the direction buttons to go to Media.
Confirm your selection by pressing OK.
Repeat this process to return to TV mode but, instead of selecting Media, choose the option ATV or DTV, depending on
the type of signal.