Instruction manual

EN
29 of 42
Phone: [phone]
Internet: www.medion.com.au
After sales support
8.10. Playing back texts
If you select TEXT from the main menu, all the available music files will be filtered and displayed on the screen.
 If there are several folders on the storage medium, use  to open the folder and confirm with QM.
 Use  to select the required text and press QM to select it for the playlist. You can select several texts for the playlist
using OK. You can also use OK to remove already selected texts from the playlist.
 Press the  button to display the previously selected text.
 The following options are available:
− RED BUTTON: Add/remove bookmarks
− GREEN BUTTON: Jump to a specific location within a document
− YELLOW BUTTON: Open/close overview of all bookmarks
− BLUE BUTTON: Shows the text document playback list
− PAGE +/-: Turn page forward/back
− PLAYLISTS: Shows the text document playback list
 The buttons on the remote control can also be used for playing back files.
 Press the GZKV button to return to the previous menu.
9. PVR function
You can use your D-LED LCD TV to record TV programmes on a USB storage medium (e.g. USB stick). You can store recordings
directly, after a time delay or according to programmed settings. Channels that are encrypted with a CI+ module cannot be
recorded.
Before it is possible to make a recording, you must make the required settings in the FEATURE > PVR/TIMESHIFT menu.
9.1. Start/stop recording directly
 Start by selecting the TV channel that you want to record.
 Press the REC button. The recording starts.
 To stop the recording, press STOP. A prompt appears. Stop the recording with YES or press NO to continue recording.
9.2. Programmed recording
You can programme broadcasts and record them at a predefined time, see FEATURE > PVR/TIMESHIFT > TIMER menu.
9.3. Playing back recordings
Recordings are played back via the media player. All programmes can be found via the
RECORD LIST on the corresponding data storage medium. The recording list can be called up directly using the REC LIST
button.