User manual

 Do not place the device near heat sources (e.g. heaters) which

could affect it.

 Do not place naked flames (e.g. lit candles) on or near the de-

vice.

 Make sure that the vents are not covered so as to ensure there

is always adequate ventilation.

 Do not place any objects on the cables as they may be dam-

aged.

 Keep a minimum distance of about 10 cm between walls and

the device or mains adapter. Ensure that ventilation is ade-

quate.

 Make sure that the device is not exposed to dripping water or

splashes, and that no objects containing liquid (for example,

vases) are placed on or near the device.

 Do not operate the device outdoors, as external elements

such as rain, snow, etc. could damage it.

 Keep the device at a distance of at least one metre from

sources of high-frequency or magnetic interference (televi-

sions, loudspeakers, mobile telephones, etc.) to avoid mal-

functions. If malfunctions do occur, find a different place to

put the device.

 Major changes in temperature or fluctuations in humidity can

cause moisture to build up within the device due to conden-

sation – this can cause an electrical short circuit.

3.3. Mains connection

 Only connect the mains adapter to a mains socket (AC 230

V ~ 50 Hz) that is easy to reach and close to the place where

you have set up the device. The socket outlet must be freely

accessible so that you can unplug the device from the mains

quickly if necessary.

 Only use the mains adapter supplied. Never try to connect the

mains adapter to other sockets, as this can cause damage.

 If the device has been moved from a cold room to a warm