Technical data

UNINSTALLING APPLICATIONS

In order to remove the installed software from your PC, follow the

steps below:

1. Click on

2. Click on

3. Finally, double click on the following icon:

Select the appropriate program from the list, start the

uninstallation and follow the instructions on screen.

CONFIGURING THE GRAPHICS TABLET

Click on

Double click on the Pad 9570 icon in order to configure the

Graphics tablet. You may need to click Switch to Classic View

on the upper left portion of the screen in order to reveal the Pad

9570 icon.

This screen is where you can configure the individual buttons of

the pen and mouse. You can also adjust the sensitivity of the

Graphics tablet and choose a unit of measurement.

CALIBRATING THE DRAWING PEN

In order to improve the accuracy of your drawing pen, you should first

make sure that it is properly calibrated with your Graphics tablet.

1. Follow the instructions above to open the Graphics tablet

configuration screen.

2. Select the Control tab.

3. Under Tracking Mode select Pen Absolute.

4. Click once with the mouse in the grey box.

5. Use the drawing pen to tap the top left corner of the

Graphics tablet.

6. Use the drawing pen to tap the bottom right corner of the

Graphics tablet.

7. Select OK.