User manual

3 Operation

Step down from the scales. The scales switch off automatically

after 8 seconds if you do not do anything else. E

3.3

Programming

personal data

The scales can store data for up to 10 people: sex, age, height.

The scaleshave preset values. These are: kg, female, 25 years

old, 165 cm

. G

Press the SET - button to switch on the scales. The memory

location is flashing in the display.

When the flashing has stopped, press UP- or DOWN-button

to select the desired memory location (0 - 9) for the user profile.

Press the SET-button to confirm the selection. Now the symbol

for the sex is flashing in the display.

= male = female = male/athlet = female/athlet

Set your sex by pressing the UP- or DOWN-button to select

the appropriate symbol in the display. If you are a fit sportsman or

sportswoman between 15 and 50 years of age, you can select

athlete mode for this setting.

= male athlete = female athlete

NOTE

Because trained sportsmen and sportswomen usually

have a very low percentage of body fat, it is advisable

to select athlete mode. This mode ensures that

athletes’ bodies are not displayed as underweight due

to the low percentage of body fat.

Press the SET button to save the setting. The preset height

starts flashing in the display.

Select your height using the UP- and DOWN-buttons .

Press the SET button to save the setting. The preset age

starts flashing in the display.

Select your age using the UP- and DOWN-buttons .

Press the SET button to save the setting.

The settings are now concluded. In the display "0.0" is shown.

You may now choose the unit of measure (kg - lb - st) by pressing

the UP- and DOWN-buttons .

10.

11.

Before you switch off the device, you can press the UP- or DOWN-

button to program other presets. Proceed as described above and

repeat steps 3. to 11. If you do not press any button for 10 seconds

during the programming, the scales switch off automatically. G