Instruction manual

4 Miscellaneous

This inhalation device meets the requirements of the EU standard 93/42/

EWG (medical device directive) and of the standard EN 13544-1: i

2007 Respiratory therapy equipment - Part1: Nebulising systems and

their components.

4.6

Directives /

norms

Electromagnetic compatibility:

The device complies with the EN 60601-1-2 standard for electromagnetic

compatibility. You can find details on this measurement data on the sepe-

rate enclosure.

4.5

Replace

the fuses

(for art. 54530

IN 550 only)

Inside the compressor unit of IN 550 two fuses (type F1AL, 250V~) are

present to protect the electrical components. Make sure, that the applian-

ce is only connected to mains outlets, which are corresponding to the

specifications mentioned in chapter 4.9 Technical specifications. If it is

necessary to replace the fuses, follow the below steps:

Open the mains cable com-

partment lid on the rear

side of the compressor. g

By turning the fuse cover

counterclockwise (e.g. with

a screwdriver) and im-

pressing it at the same

time (see alongside mar-

king), you can open the

fuse chambers.

Rear view of compressor IN 550

Replace the old fuses by

new ones of the same type

and close the lid again.



This product must not be disposed of together with domestic waste. All

users are obliged to hand in all electrical or electronic devices, regardless

of whether or not they contain toxic substances, at a municipal or commer-

cial collection point so that they can be disposed of in an environmentally

acceptable manner. Consult your municipal authority or your dealer for in-

formation about disposal. E

4.7

Disposal