Operation Manual

3 Operating

and connect the plug to the socket again



. Switch the device on again. The

programmed time intervals have been cleared and the device will operate con-

tinuously again when it is switched on. The clock and the alarm must be set

again in this case.

• In order to switch a previously set alarm on or off, press the SET button



and

the ENTER button



simultaneously. If the alarm bell symbol is displayed the

alarm has been activated. If the alarm bell symbol is not displayed, the alarm

will not go off at the set time.

• If the alarm goes off at the set time, it can be switched off by pressing the

ENTER button



. If the alarm is not switched off it stops automatically after 2

minutes. The alarm goes off again on the next day at the set time.

• The SNOOZE function can be activated by pressing the SET button



after the

alarm has gone off. In this case the alarm stops and comes on again automa-

tically after 4 minutes.

Your Medibreeze PLUS has a battery compartment containing three LR1130

batteries. These store the on/off time, the timer intervals, the clock and the

alarm time in the event of a power failure or if the device is moved to another

location.

To change the batteries, switch the device off and remove the water tank. Wipe

up the water remaining in the nebulizer chamber with a cloth. Turn the device

over and open the battery compartment beneath the device. Remove the three

batteries and replace them with three new LR1130 batteries. Please note the

battery polarities marked in the battery compartment.

3.9

Switch alarm

on/off

3.10

Changing the

batteries