Operation Manual

3 Operation

1. Set the time by turning the small wheel in the battery compartment.

2. If you do not use the clock, remove the battery.

1. Place the scale on a stable, firm surface. All four feet must be touching

the floor. Uneven and soft flooring affects measuring accuracy.

2. Always weigh yourself on the same scale, at the same place and at the

same time. Weigh yourself without clothing, before meals, preferably in

the morning before breakfast.

3. If you stand with both feet on the scales, “0.0 kg” appears.

The values change and the weight unit ”kg” flashes while your weight is

being calculated. When the measurement has stabilised, ”kg” is shown

continuously. Your measured body weight, e.g. 65.1 (65 kg 100 g),

will be displayed for approx. 6 seconds. The scales then switch off auto-

matically.

NOTE

If the scales have been transported or moved, you can calibrate

them by tapping the surface lightly with your foot until “ CAL”

first appears and then “0.0 kg” in the display. The scales switch

off automatically after approx. 6 seconds.

The following error messages may appear in the display:

The scale is overloaded.

The battery is low and must be replaced.

Error during measurement

3.5

Error messages

3.4

Weighing

3.3

Setting the clock

40436_PSA_Waage_NCL_West_FINAL.qxd:NewClassicLine 14.04.2011 7:18 Uhr Seite 12