Instruction manual

12
GB
2 Operation
Use the buttons

or

to choose between radio (FM) or sound and
confirm your choice by pressing the Set button

again.
If you have selected radio (FM) you can use the buttons

or

to
choose a radio station with which you would like to be woken up. Again,
confirm your selection with the Set button

.
If you have selected sounds of nature, you can use the buttons

or

to choose between eight different sounds of nature whereby you hear the
sound briefly and a pictogram appears on the display. Again, confirm your
selection with the Set button

.
The setting for the volume follows. On the display

the digits under the
icon reflect the set volume. Use the buttons

or

to set the desired
volume. Press the Set button

again to confirm your entry. You can now
set the brightness here. On the display the digits under the icon reflect the
set brightness. Use the buttons

or

to set the desired brightness.
Confirm your selection with the Set button

again. If you need only light or
sound function, set the other at 0.
If you did not press buttons for 10s during setting, it will quit all setting auto-
matically.
After setting to record your choose, you still need to use Alarm button

and
Zizz button

to activate the function.
Proceed in the same way to set up alarm 2 (AL2) or Zizz (shot-Time alarm).
If an alarm is activated, the buttons for radio

, light

and relax

are
not available.
Sound/Radio button

If you press the Sound/Radio button

once, the Sound icon appears, the
broadcast signal blinks also. Use

or

to select the sound of your
choice. Use the buttons

▼ or ▲ to set the desired volume.
If you press the Sound/Radio button

a second time, the Radio (FM) icon
appears, the broadcast signal blinks also. Use the buttons

or

to
choose a radio station. Use the buttons

▼ or ▲ to set the desired
volume. To press the Sound/Radio button

the third time or Off button

to quit.
Dimmer button

If you press the Dimmer button

the display lights up and changes from
High green – Low green – High yellow – Low yellow - off. Press the Dimmer
button

at your brightness and light colour of choice to make your selection.
GA_SAC_West_Final_neu.qxd:Lichtwecker 15.10.2008 12:17 Uhr Seite 12