Instruction manual

6 Operation with MAC

If you do not see an IP address, your router

is not configured to DHCP-service or is not

working correctly. Restart the camera or

set your IP manually by double-clicking on

the device. G

In this window you may input an IP, subnet,

gateway, DNS Server manually and assign

the HTTP port. G

Enter the authentication information (user

and password) and click "OK". G

After a while the camera with an IP address

will appear in the list. Click twice on the

found device. Your standard browser will

open. Please proceed as described under

"7 The web interface". G

NOTE

The factory default setting for

"User" is "admin" and for "Pass-

word" it is "medisana".

Downloading the software: G

To discover the Smart Baby Monitor in your network download the latest version of

the free software for Mac from the software section of our homepage. G

(http://www.medisana.com/sbm)

NOTE

When using MacOSX 10.8 „Mountain Lion“ go to:

System Preferences -> Security & Privacy -> Allow applications downloaded

from:

and select the option „Anywhere“.