User's Manual

Rev. 05

4. Press the button on the side of the watch to activate it. The LED on the top of the watch

will blink to indicate it has been successfully activated.

5. Pair the watch with your smart device, following the on-screen instructions.

 Make sure the watch is within 3 feet of the base unit (if applicable) or the smart

device while pairing.

 Make sure to use the proper device ID while pairing.

6. Use the app to receive continuous temperature data.

7. To terminate function of the watch, simply remove it from the wearer and it will turn off

automatically after a short time.

6) LED Indications

LED Indication

Meaning

LED off

Device is off and not communicating

LED blinking once every 5 seconds

Device is functioning normally

LED blinking once every second

Device battery is low- please recharge

7) Charging

1. Remove the watch from the wearer’s wrist before charging. The Watch-Temp™ is not

designed to be used while charging.

2. Plug the charging cable into any USB port and clip the charging pins on the charging

cable to the charging pads on the underside of the watch.

3. Do not use a charging cable other than the one provided with the Watch-Temp™.

8) Care and Cleaning

 Remove the watch from the wearer before cleaning.

 To clean, the surface may be wiped an alcohol swab or cotton swab moistened with 70%

isopropyl alcohol or a soft, dry cloth.

 Never use an abrasive cleaner or submerge the watch in water or other liquids.

 After cleaning with alcohol, wait at least two minutes before reusing.

 Do not expose the watch to extreme temperatures, humidity, direct sunlight or shock.

 Store the watch at room temperature.

 The Watch-Temp™ should not require any routine maintenance beyond cleaning and

charging. In the event further maintenance is required, it must be performed at the

manufacturing facility.

9) Troubleshooting

Issue

Solution

App is not receiving data

 Ensure that the watch is properly charged and has been

activated by pressing the button.

 Ensure that the watch is within 3 feet of the base unit (if

applicable) or the smart device.

 If using the base unit, ensure that both it and the smart

device are connected to the internet.

 If connecting directly to a smart device, ensure the