manual

MONTAGE
Stecken Sie die Füße (2) in das untere Kunststoffkreuz auf
dem Stativ (1)ein.
A
2
1
Teileliste.
D
1
S
B
3
4
Den oberen Spannkreuz mit Stange in die Strebe
stecken.
C
2
4
5
3
1
Important !
Projection screen can be damaged without using protective
foam material or when stored in a different way !
Do not put any objects on the packing with the screen !
I
II
Screen packing and storage instructions
Projection screen with
foam material rolled up
on a paper tube.
Roll up carefully the screen with foam
material on the tube to avoid deformations
and unevenness. When rolling up slightly
stretch the screen both lengthwise and
transversely (see Fig.2).
After rolling the screen up fold the black
screen hem back and wrap the roll with
the rest of foam material (Fig.3).
Put the screen on an even surface (table or clean floor) white side up and cover it
with a sheet of foam material of the same size - edges aligned together. Put paper
tube (Fig.1) on the screen with foam material.
Bag (I) with components
1, 2 and 4.
Bag (II) with
component 3.
Please be careful when packing the projection screen. The screen
material used is highly sensitive. Faulty rolling up of the screen
can result in deformations that can permanently remain visible
even after unrolling and stretching the screen on the frame !!
Warning - if the screen is not rolled up properly, possible
deformations can be permanent !!
A
A
GB
III
I
III
II
Put the rolled-up screen with
the foam material into the
bag (III).
Put bags (I) and (II) under the seperation and
secure them with the Velcro-fastener. Put
bag (III) above the seperation.
6
Beide Hälften des oberen Spannkreuzes (3) in Pfeilrichtung
auf die Stangen (4) aufsetzen und mit der Schraube anziehen.