User Manual

6 7
LOW PRESSURE
POWER
SINGLE
SLEEVE
CALF/THIGH
SLEEVE
FOOT
HIGH PRESSURE/
SYSTEM FAILURE
SLEEVE ERROR
GENERAL SAFETY
These usage and safety guidelines are IMPORTANT! Please follow them carefully.
General Use
1. Carefully unpack the contents of the pump package.
2. Connect the master control unit to a proper power source.
3. Storage Environment Specification.
4. Plug in the unit and verify airflow from the hose connection ports.
5. Place in a dry storage area when not in use.
Storage Environment Specification
It is recommended that the following guidelines be used whenever the system is
being stored or transported to another location:
- Temperature limitations: 41°F ~ 140°F (5°C ~ 60°C)
- Relative humidity: 30% ~ 75%
Pump
1. Check the power cord and plug for abrasions and excessive wear.
2. Plug in the unit and verify airflow from the hose connection ports.
3. Place in a dry storage area when not in use.
CONTROL PANEL FEATURES
Single Sleeve Mode Power Button Power Light
Error Light
Pressure Setting
for Calf/Thigh
at 40mmHg
Pressure Setting
for Foot
at 120mmHg
CONNECTION INSTRUCTION
Step 1 - Connect the air hoses to Control Unit.
Step 2 - Connect the air hoses to sleeves.
PACKING LIST
Package 1 of 1 contains:
1 – Hemo-Force®Lite Pump
1 – Air Tube Pair
1 – User Manual
OPERATING INSTRUCTIONS
The Hemo-Force Lite is easy to set up. The following steps should be followed.
Please read this instruction manual in its entirety before setting up.
1. Once the pump and sleeves have been removed from their packaging plug
the pump into an electrical outlet. DO NOT TURN ON YET.
2. Position the pump on any flat surface or suspend the pump at the foot of the